Showing 1009-1020 of 2042 item(s)
Sort by:
Best sellers Relevance Name, A to Z Name, Z to A
Showing 1009-1020 of 2042 item(s)

Active filters

"On-Line" vibration monitor A3900 II
0

"On-Line" vibration monitor A3900 II

  • measures vibration velocity (10 Hz... 1 kHz),
  • measures vibration Acceleration (10 Hz... 1 kHz),
  • measures RMS (RMS) and peak (peak),
  • integrated sensor power supply, ICP®
  • adjustable 4.. 20 mA current loop (active or passive),.
  • programmable limit value (alert, alarm).
  • RS-232 serial interface
    TMS-2100E11
    0

    TMS-2100E11

    • Modal Shaker
    • Force 440 N,.
    • Frequency range 0... 5,400 Hz,
    • Stroke 25.4 mm
      PCB-356A61
      0

      PCB-356A61

      • Triaxial ICP® miniature vibration sensor,
      • With built-in low-pass filter,.
      • Measuring range 500 g
      • Sensitivity 10 mV / g,.
      • Frequency range 2... 4,000 Hz,
      • Weight 4 grams.
      • Integrated cable, length 1.5 m,
        ending on 4-pin female connector.
      • Including extension cable, length 1.5 m,
        ending on three BNC plugs
        PCB-356A43
        0

        PCB-356A43

        • Triaxial ICP® miniature vibration sensor,
        • With TEDS 1.0,
        • Measuring range 500 g,
        • Sensitivity 10 mV / g,
        • Frequency range 0.4... 10,000 Hz,
        • Dimensions 4.2 grams,
        • 4-pin female connector on the side
          PCB-176M03
          2

          PCB-176M03

          • Pressure sensor with charge output for detecting combustion instability in turbines,
          • With ATEX / CSA approval,
          • Continuous use temperature up to 530 ° C,
          • With UHT-12™ sensor element,
            (no popcorn noise),
          • Measurement range 1.4 bar,
          • Sensitivity 247 pC/bar,
          • Frequency range up to 10,000 Hz,
          • Integrated hardline cable,
            ending on 7/16-27-connector
            PCB-(M)202B
            4

            PCB-(M)202B

            • ICP® force-load washer, 
            • Measuring range 1 kN, 
            • Sensitivity 4991 mV / kN, 
            • Frequency range 0.005 ... 65.000 Hz, 
            • 10-32 connector on the side
              PCB-350B44
              6

              PCB-350B44

              • Triaxial ICP® shock acceleration sensor
              • Ground Isolated
              • With electrical and mechanical filter
                (-3 dB at 21,000 Hz)
              • Measuring range 5,000 g
              • Sensitivity 1.0 mV / g
              • Frequency range 0.4 ... 10,000 Hz
              • Integrated connection cable, length 1.5 meters,
                ending on 4-pin connection socket
              • Including extension cable, length 1.5 meters,
                ending on three BNC plugs
                PCB-034W20
                1

                PCB-034W20

                • Protection class IP 68
                • Shielded four-wire Teflon cable
                • Length 6 meters
                • 4-pin connector to three BNC connectors
                  PCB-3711F1150G
                  1

                  PCB-3711F1150G

                  • MEMS accelerometer
                  • Suitable for measuring static accelerations
                  • Measuring range ± 50 g pk (± 490m / s²)
                  • Sensitivity (± 3%) 27 mV / g (2.8mV / (m / s²))
                  • Typical frequency range (± 5%) 0… 1,500 Hz
                  • Supply voltage 5… 32 V DC
                  • 4-pin connection socket on the side
                    PCB-3741F1250G
                    1

                    PCB-3741F1250G

                    • MEMS accelerometer
                    • Suitable for measuring static accelerations
                    • Measuring range ± 50 g pk (± 490m / s²)
                    • Sensitivity (± 3%) 54 mV / g (5.5mV / (m / s²))
                    • Frequency range (± 5%) 0… 1,500 Hz
                    • Supply voltage 5… 32 V DC
                    • Integrated connection cable, length 3 meters,
                      ending on stripped and tinned ends
                      Expert software model DDS Expert software model DDS
                      1

                      Expert software model DDS

                      • Windows 7 and later compatible
                      • Supports Microsoft SQL Server,
                      • "Online" or "Offline" operation possible,
                      • Intelligent cursor functions (harmonic, sideband, trend...)
                      • Input of gears kinematics,
                      • Implementation of warehouse database
                        TMS-2075E
                        0

                        TMS-2075E

                        • Dual purpose Shaker,
                        • For the modal analysis as well as for part / component testing,
                        • Maximum force 334 N,.
                        • Frequency range 0... 6,500 Hz,
                        • Stroke 25 mm
                          Back to top