ICP® shock acceleration sensors

ICP® shock acceleration sensors

These accelerometers are especially suitable for measuring shocks of up to 100,000 g or for detecting pulse-shaped accelerations of less than 10 μs. Special mechanical or electrical filters avoid the excitation and overdriving by high-frequency signal components. All models already include an ICP® amplifier.



Showing 1-10 of 10 item(s)
Showing 1-10 of 10 item(s)

Active filters

PCB-352A92

  • ICP® miniature shock sensor
  • Mass 0.17 grams
  • Measuring range 5,000 g
  • Sensitivity 1 mV / g
  • Continuous use temperature up to 163 ° C
  • Frequency range 1.2... 10,000 Hz
  • Integrated cable, length 0.9 m,
    ending on 10-32 socket

PCB-352A91

  • ICP® miniature shock sensor
  • Mass 0.17 grams
  • Measuring range 5,000 g
  • Sensitivity 1 mV / g
  • Continuous use temperature up to 163 ° C
  • Frequency range 1.2... 10,000 Hz
  • Integrated cable, length 0.9 m,
    ending on 10-32 socket

PCB-350A43

  • Triaxial ICP® shock acceleration sensor,
  • Mass-insulated,
  • With electric and mechanical filters,
    (-3 dB at 25,000 Hz)
  • Measuring range 10,000 g,
  • Sensitivity 0.5 mV / g,
  • Frequency range 0.4... 10,000 Hz,
  • Integrated cable, length 1.5 m,
    ending on 4-pin female connector,
  • Including extension cable, length 1.5 m,
    ending on three BNC plugs

PCB-(M)350D02

  • ICP® shock acceleration sensor,
  • Masseisoliert,
  • With electric and mechanical filter,
  • Measuring range 50,000 g,
  • Sensitivity 0.1 mV / g,
  • Frequency range 4 … 10,000 Hz,
  • Integrated cable, length 3 m, ending on 10-32 plug

PCB-(M)350C24

  • ICP® shock acceleration sensor,
  • Masseisoliert,
  • With electric and mechanical filter,
  • Measuring range 5,000 g,
  • Sensitivity 1 mV / g,
  • Frequency range 0.4 … 10,000 Hz,
  • Integrated cable, length 3 m,
    ending on 10-32 plug

    PCB-(M)350C23

  • ICP® shock acceleration sensor,
  • Masseisoliert,
  • With electric and mechanical filter,
  • Measuring range 10,000 g,
  • Frequency range 0.4 … 10,000 Hz,
  • Integrated cable, length 3 m,
    ending on 10-32 plug

    PCB-(M)350C04

  • ICP® shock acceleration sensor,
  • With electric and mechanical filter,
  • Measuring range 5,000 g,
  • Sensitivity 1 mV / g,
  • Frequency range 0.4 … 10,000 Hz,
  • 10-32 female connector above

    PCB-(M)350B01

  • ICP® shock acceleration sensor,
  • Masseisoliert,
  • With electric and mechanical filter,
  • Measuring range 100,000 g,
  • Sensitivity 0.05 mV / g,
  • Frequency range 4 … 10,000 Hz,
  • Integrated cable, length 3 m,
    ending on 10-32 plug

    PCB-(M)350A14

    • ICP® shock acceleration sensor,
    • With an electric filter,
    • Measuring range 5,000 g,
    • Sensitivity 1 mV / g,
    • Frequency range 0.4 … 7,500 Hz,
    • 10-32 female connector above

    PCB-(M)350A13

    • ICP® shock acceleration sensor,
    • With an electric filter,
    • Measuring range 10,000 g,
    • Sensitivity 0.5 mV / g,
    • Frequency range 0.4 … 7,500 Hz,
    • 10-32 female connector above