ATEX sensors

ATEX sensors

For use in potentially explosive atmospheres, for example in chemical plants, the use of sensors with ATEX approval is mandatory. The sensors presented here are approved for use in EX zones in the European Union.
Most models may also be used in the US, Canada and Russia.

Showing 1-12 of 18 item(s)
Showing 1-12 of 18 item(s)

Active filters

PCB-EX357E93

  • With ATEX / IECEx / CSA approval
  • Vibration sensor with charge output
  • Measuring axis perpendicular to the mounting screw
  • Continuous operating temperature up to 649 ° C
  • With through hole
  • Measuring range 1,000 g
  • Sensitivity 2.3 pC / g
  • Upper limit frequency 3 kHz
  • Integrated hardline connection cable, length 3 meters,
    ending on 10-32 socket
  • New: slim 10-32 socket (diameter 6.35 mm)

PCB-EX357E92

  • With ATEX / IECEx / CSA approval
  • Vibration sensor with charge output
  • Continuous operating temperature up to 649 ° C
  • With through hole
  • Measuring range 1,000 g
  • Sensitivity 2.3 pC / g
  • Upper limit frequency 3 kHz
  • Integrated hardline connection cable, length 3 meters,
    ending on 10-32 socket
  • New: slim 10-32 socket (diameter 6.35 mm)

PCB-EX357E91

  • With ATEX / IECEx / CSA approval
  • Vibration sensor with charge output
  • Measuring axis perpendicular to the mounting screw
  • Continuous operating temperature up to 649 ° C
  • With through hole
  • Measuring range 1,000 g
  • Sensitivity 5 pC / g
  • Upper limit frequency 2,500 Hz
  • Integrated hardline connection cable, length 3 meters,
    ending on 10-32 socket
  • New: slim 10-32 socket (diameter 6.35 mm)

PCB-EX357E90

  • With ATEX / IECEx / CSA approval
  • Vibration sensor with charge output
  • Continuous operating temperature up to 649 ° C
  • With through hole
  • Measuring range 1,000 g
  • Sensitivity 5 pC / g
  • Upper limit frequency 2,500 Hz
  • Integrated hardline connection cable, length 3 meters,
    ending on 10-32 socket
  • New: slim 10-32 socket (diameter 6.35 mm)

PCB-EX357A95

  • With ATEX / IECEx / CSA approval
  • Vibration sensor with differential charge output
  • Measuring axis perpendicular to the mounting screw
  • Continuous operating temperature up to 649 ° C
  • With through hole
  • Measuring range 1,000 g
  • Sensitivity 3.3 pC / g
  • Upper limit frequency 3,000 Hz
  • Integrated hardline connection cable, length 3 meters,
    ending on 7 / 16-27 2-pin

PCB-EX357A94

  • With ATEX / IECEx / CSA approval
  • Vibration sensor with differential charge output
  • Continuous operating temperature up to 649 ° C
  • With through hole
  • Measuring range 1,000 g
  • Sensitivity 3.3 pC / g
  • Upper limit frequency 3,000 Hz
  • Integrated hardline connection cable, length 3 meters,
    ending on 7 / 16-27 2-pin

PCB-EX646B71

  • Vibrationstransmitter mit Stromausgang entsprechend
    dem Effektivwert der Schwingbeschleunigung,
  • Mit ATEX-/CSA-Zulassung,
  • Messbereich 0 … 10 g RMS,
  • Ausgangsbereich 4 … 20 mA,
  • Frequenzbereich 3 … 5.000 Hz,
  • Anschlussklemmen oben

    PCB-EX641B70

    • Vibrationstransmitter mit Stromausgang entsprechend
      dem Effektivwert der Schwinggeschwindigkeit,
    • Mit ATEX-/CSA-Zulassung,
    • Messbereich 0 … 12,7 mm/s RMS,
    • Ausgangsbereich 4 … 20 mA,
    • Frequenzbereich 10 … 1.000 Hz,
    • Anschlussklemmen oben

    PCB-EX641B71D

  • Vibrationstransmitter mit Stromausgang entsprechend
    dem Effektivwert der Schwinggeschwindigkeit,
  • Mit ATEX-Zulassung (EX d),
  • Messbereich 0 … 25,4 mm/s RMS,
  • Ausgangsbereich 4 … 20 mA,
  • Frequenzbereich 10 … 1.000 Hz,
  • Anschlussklemmen oben

    PCB-EX(M)608A11

  • Industrial ICP® vibration sensor,
  • With ATEX / CSA approval,
  • Measurement range 50 g,
  • Sensitivity 100 mV/g,
  • Frequency range 0.5 … 10,000 Hz,
  • One-point calibration at 100 Hz,
  • Integrated cable, length 3 m,
    ending on cut end

    PCB-EX(M)628F01

  • Industrial ICP® vibration sensor,
  • With ATEX / CSA approval,
  • Measurement range 50 g,
  • Sensitivity 100 mV/g,
  • Frequency range 0.33 … 12.000 Hz,
  • Frequency response calibration,
  • 2-pin female connector above