Machine condition monitors

Machine condition monitors

The failure of pumps or compressors in the production can lead to considerable damage and production delays. Therefore, such aggregates are increasingly monitored continuously. A particularly economical solution to this problem is the vibration monitor SYN-CW219, which, together with a low-cost industrial ICP® vibration sensor, detects changes early, signals danger and notifies the higher-level system control. From the measured vibration signal, the RMS value of the vibration acceleration is determined according to ISO 10816-3 or the vibration velocity. At the same time, the SYN-CW219 detects the peak value of accelerations above an adjustable frequency and makes this signal as well as the RMS value available as a 4 ... 20 mA signal.

Showing 1-3 of 3 item(s)
Showing 1-3 of 3 item(s)

Active filters

Vibration monitor SYN-CW-219 C / NC

  • Machine status monitor,
  • Inputs: ICP®, 4... 20 mA, 0... 10 V,
  • 2 adjustable alarm thresholds,
  • Alarm release according to appropriate sizes,
  • Pre-alarm and main alarm relay,
  • Hardware monitoring,
  • Process size-dependent alert thresholds,
  • Crest, narrow band level analysis,
    adjustable cut-off frequencies for frequency band RMS

Vibration monitor SYN-CW-220 C / NC

  • Machine status monitor,
  • Inputs: ICP®, 4... 20 mA, 0... 10 V,
  • 2 adjustable alarm thresholds,
  • Alarm release according to appropriate sizes,
  • Pre-alarm and main alarm relay,
  • Hardware monitoring,
  • Process size-dependent alert thresholds,
  • Crest, narrow band level analysis,
    speed-controlled narrow-band level analysis,
    adjustable cut-off frequencies for frequency band RMS