Industrial vibration sensors-

Industrial Vibration Sensors

.

Showing 1-12 of 201 item(s)
Showing 1-12 of 201 item(s)

Active filters

PCB-MXM622B11

  • Industrial ICP® vibration sensor
  • With mine approval
  • Measuring range 50 g
  • Sensitivity 100 mV / g
  • Frequency range 0.2 ... 10,000 Hz
  • Frequenzgangkalibrierung
  • Integrated connection cable, length 3 meters,
    ending on the cut end

PCB-VO(M)622B01

  • Industrial ICP® vibration sensor
  • With vibration velocity output
  • Measuring range 1.27 m / s
  • Sensitivity 3.9 V / (m / s)
  • Frequency range 3 ... 9,000 Hz
  • Frequenzgangkalibrierung
  • 2-pin female connector on top

PCB-VO(M)622B11

  • Industrial ICP® vibration sensor
  • With vibration velocity output
  • Measuring range 1.27 m / s
  • Sensitivity 3.9 V / (m / s)
  • Frequency range 3 ... 9,000 Hz
  • Frequenzgangkalibrierung
  • Integrated connection cable, length 3 meters,
    ending on the cut end

TMS-9100D

  • Portable system for calibration of vibration sensors
  • Frequency range 5 ... 10,000 Hz
  • adjustable amplitude
  • LCD display in SI or US units
  • Battery operation up to 18 hours

TMS-9210D

  • Portable system for calibration of vibration sensors
  • Frequency range 0.7 ... 2,000 Hz
  • adjustable amplitude
  • LCD display in SI or US units
  • Battery operation up to 18 hours
  • Integrated ICP® supply and display of the bias voltage
  • Signal input socket and output socket for reference signal
  • Including data storage and USB port for data export

PCB-EX619A11

  • Vibration sensor with charge output,
  • With ATEX/CSA approval,
  • Continuous use temperature up to 482 ° C,
  • With through-holes
  • Measuring range 500 g,
  • Sensitivity 50 pC/g,
  • Upper cutoff frequency 5,000 Hz,
  • Integrated hardline cable, length 3 m,
    ending on 2-pin connector

PCB-682A15

  • Transmitter for mounting on a top hat rail
  • Connection of an industrial ICP® vibration sensor
  • Integrated sensor supply

Digiducer - USB Digital Accelerometer

  • Works with Windows, iOS, Linux, Android, and Mac OS
  • Record vibration data via laptop or tablet
  • Uses existing operating system drivers – no download required
  • Piezoelectric ruggedness and extended dynamic range
  • Eliminates need for data acquisition
  • Flat response up to 8 kHz
  • 24 bit internal ADC
  • Supported by independent software vendors

PCB-(M)603M113

  • Industrial piezoelectric vibration sensor 
    in 3-wire technology
  • No ICP® sensor power required
  • Measuring range 20 g
  • Sensitivity 100 mV / g
  • Frequency range 1.6 ... 10.000 Hz
  • Supply voltage 3 ... 12V
  • One-point calibration at 100 Hz
  • 3-pin connector at the top

PCB-(M)607M83

  • Industrial ICP® vibration sensor 
    in 3- wire technology
  • No ICP® sensor power required
  • Measuring range 45 g
  • Sensitivity 100 mV / g
  • Frequency range 1.5 ... 10.000 Hz
  • One-point calibration at 100 Hz
  • Freely orientable integrated connection cable, length 3 meters, 
    ending on cut end

PCB-604B11

  • Triaxial industrial ICP® vibration sensor, 
  • With through hole, 
  • Measuring range 50 g, 
  • Sensitivity 100 mV / g, 
  • Frequency range 0.5 ... 5,000 Hz, 
  • One-point calibration at 100 Hz, 
  • 4-pin bayonet connector on the side, 
  • Integrated, waterproof connection cable, 3 m

PCB-637A06

  • Industrial ICP® vibration sensor, 
  • Quartz sensor element, 
  • Temperature range -196 ... +121 ° C, 
  • Measuring range 200 g, 
  • Sensitivity 25 mV / g, 
  • Frequency range 0.2 ... 1500 Hz, 
  • 2-pin connector at the top