Miniature acceleration sensors accelerometers

Miniature acceleration sensors

Accelerometers with ceramic sensor elements are characterized by excellent resolution and high charge efficiency. These properties make it possible to realize even small sensor designs. Triaxial miniature acceleration transducers (mass from 1 gram and up) are used for measurements on small and light structures, where the vibration behavior must not be falsified by additionally applied large transducer masses. With triaxial miniature transducers, frequencies of up to 10 kHz can be measured.

Showing 1-12 of 33 item(s)
Showing 1-12 of 33 item(s)

Active filters

PCB-356A06

  • Triaxialer ICP®-Miniatur-Vibrationssensor
  • Mass 1 gram
  • Measuring range 1,000 g
  • Sensitivity 5 mV / g
  • Frequency range 2 ... 8,000 Hz
  • 4-pin female connector
  • Including cable (034K10), length 3 meters, ending on three BNC plugs

PCB-356A05/NC

  • Triaxial ICP®/IEPE miniatur vibration sensor
  • Operating temperature up to 163 ° C
  • Measuring range 20,000 g
  • Sensitivity 0.25 mV / g
  • Frequency range 1… 6,000 Hz
  • Integrated, highly flexible connection cable, length 1.5 meters,
  • ending on 4-pin connector
  • Without connection cable

PCB-356A05

  • Triaxial ICP®/IEPE miniatur vibration sensor
  • Operating temperature up to 163 ° C
  • Measuring range 20,000 g
  • Sensitivity 0.25 mV / g
  • Frequency range 1… 6,000 Hz
  • Integrated, highly flexible connection cable, length 1.5 meters,
  • ending on 4-pin connector

PCB-356A04/NC

  • Triaxial ICP®/IEPE miniatur vibration sensor
  • Operating temperature up to 163 ° C
  • Measuring range 5,000 g
  • Sensitivity 1 mV / g
  • Frequency range 1… 6,000 Hz
  • Integrated, highly flexible connection cable, length 1.5 meters,
  • ending on 4-pin connector
  • Without connection cable

PCB-356A04

  • Triaxial ICP®/IEPE miniatur vibration sensor
  • Operating temperature up to 163 ° C
  • Measuring range 5,000 g
  • Sensitivity 1 mV / g
  • Frequency range 1… 6,000 Hz
  • Integrated, highly flexible connection cable, length 1.5 meters,
  • ending on 4-pin connector

PCB-J356A45

  • Triaxial ICP® miniature vibration sensor
  • Mass-insulated housing
  • With TEDS 1.0
  • Measurement range 50 g
  • Sensitivity 100mV / g
  • Frequency range 0.4... 10,000 Hz
  • Dimensions 4.2 grams
  • 4-pin female connector on the side

PCB-J356A44

  • Triaxial ICP® miniature vibration sensor
  • Mass-insulated housing
  • With TEDS 1.0
  • Measuring range 100 g
  • Sensitivity 50mv / g
  • Frequency range 0.4... 10,000 Hz
  • Dimensions 4.2 grams
  • 4-pin female connector on the side

PCB-J356A43

  • Triaxial ICP® miniature vibration sensor
  • Mass-insulated housing
  • With TEDS 1.0
  • Measuring range 500 g
  • Sensitivity 10 mV / g
  • Frequency range 0.4... 10,000 Hz
  • Dimensions 4.2 grams
  • 4-pin female connector on the side

PCB-356A45

  • Triaxial ICP® miniature vibration sensor,
  • With TEDS 1.0,
  • Measurement range 50 g,
  • Sensitivity 100 mV/g,
  • Frequency range 0.4... 10,000 Hz,
  • Dimensions 4.2 grams,
  • 4-pin female connector on the side

PCB-356A44

  • Triaxial ICP® miniature vibration sensor,
  • With TEDS 1.0,
  • Measuring range 100 g,
  • Sensitivity 50 mV / g,
  • Frequency range 0.4... 10,000 Hz,
  • Dimensions 4.2 grams,
  • 4-pin female connector on the side,

PCB-356A43

  • Triaxial ICP® miniature vibration sensor,
  • With TEDS 1.0,
  • Measuring range 500 g,
  • Sensitivity 10 mV / g,
  • Frequency range 0.4... 10,000 Hz,
  • Dimensions 4.2 grams,
  • 4-pin female connector on the side

PCB-356A61

  • Triaxial ICP® miniature vibration sensor,
  • With built-in low-pass filter,.
  • Measuring range 500 g
  • Sensitivity 10 mV / g,.
  • Frequency range 2... 4,000 Hz,
  • Weight 4 grams.
  • Integrated cable, length 1.5 m,
    ending on 4-pin female connector.
  • Including extension cable, length 1.5 m,
    ending on three BNC plugs