Low cost vibration sensors

Low cost vibration sensors

For permanent installation of sensor to the machinery and plant monitoring in the framework of preventive maintenance industrial ICP® are accelerometers used. It is characterized by rugged stainless steel case. The double-walled construction of sensor has ground an insulating effect and prevents signal distortion due to outher influences. For use in liquids or oils are transducer with dense, integrated connection cables available.

Showing 1-12 of 31 item(s)
Showing 1-12 of 31 item(s)

Active filters

PCB-(M)627A71

  • Industrial ICP® vibration sensor,
  • Measurement range 50 g,
  • Sensitivity 100 mV/g,
  • Frequency range 0.33 … 10,000 Hz,
  • One-point calibration at 100 Hz,
  • Connection terminals above

    PCB-(M)627A61

  • Industrial ICP® vibration sensor,
  • Measurement range 50 g,
  • Sensitivity 100 mV/g,
  • Frequency range 0.33 … 10,000 Hz,
  • One-point calibration at 100 Hz,
  • Integrated armored cable, length 3 m,
    ending on cut end

    PCB-(M)627A11

  • Industrial ICP® vibration sensor,
  • Measurement range 50 g,
  • Sensitivity 100 mV/g,
  • Frequency range 0.33 … 10,000 Hz,
  • One-point calibration at 100 Hz,
  • Integrated cable, length 3 m,
    ending on cut end

    PCB-(M)627A01

  • Industrial ICP® vibration sensor,
  • Measurement range 50 g,
  • Sensitivity 100 mV/g,
  • Frequency range 0.33 … 10,000 Hz,
  • One-point calibration at 100 Hz,
  • 2-pin female connector above

    PCB-(M)608A11

  • Industrial ICP® vibration sensor,
  • Measurement range 50 g,
  • Sensitivity 100 mV/g,
  • Frequency range 0.5 … 10,000 Hz,
  • One-point calibration at 100 Hz,
  • Integrated cable, length 3 m,
    ending on cut end

    PCB-607M123/010AC

  • Industrial ICP® vibration sensor,
  • Integrated mounting magnet,
  • Settling time ≤ 2 s,
  • Measurement range 50 g,
  • Sensitivity 100 mV/g,
  • Frequency range 0.5 … 13,000 Hz,
  • Frequency response calibration,
  • Integrated armored cable, length 3 m,
    ending to BNC,
  • other cable configurations on request

    PCB-(M)607A61

  • Industrial ICP® vibration sensor,
  • Measurement range 50 g,
  • Sensitivity 100 mV/g,
  • Frequency range 0.5 … 10,000 Hz,
  • One-point calibration at 100 Hz,
  • Free ausrichtbares integrated connecting cable with reinforcement, length 3 m,
    ending on cut end

    PCB-(M)607A60

  • Industrial ICP® vibration sensor,
  • Measuring range 500 g
  • Sensitivity 10 mV / g,
  • Frequency range 0.5 … 10,000 Hz,
  • One-point calibration at 100 Hz,
  • Free ausrichtbares integrated connecting cable with reinforcement, length 3 m,
    ending on cut end

    PCB-(M)607A11

  • Industrial ICP® vibration sensor,
  • Measurement range 50 g,
  • Sensitivity 100 mV/g,
  • Frequency range 0.5 … 10,000 Hz,
  • One-point calibration at 100 Hz,
  • Free ausrichtbares integrated cable, length 3 m,
    ending on cut end

    PCB-(M)607A01

  • Industrial ICP® vibration sensor,
  • Measurement range 50 g,
  • Sensitivity 100 mV/g,
  • Frequency range 0.5 … 10,000 Hz,
  • One-point calibration at 100 Hz,
  • 2-pin connector side, freely adjustable

    PCB-(M)606B11

  • Industrial ICP® vibration sensor,
  • With through hole,
  • Measurement range 50 g,
  • Sensitivity 100 mV/g,
  • Frequency range 0.5 … 10,000 Hz,
  • One-point calibration at 100 Hz,
  • Integrated cable, length 3 m,
    ending on cut end

    PCB-(M)606B01

  • Industrial ICP® vibration sensor,
  • With through hole,
  • Measurement range 50 g,
  • Sensitivity 100 mV/g,
  • Frequency range 0.5 … 10,000 Hz,
  • One-point calibration at 100 Hz,
  • 2-pin female connector on the side