PCB-3741B1210G
MEMS accelerometer, Suitable for measuring static accelerations, Measuring range 10 g, Sensitivity200 mV / g, Frequency range 0 … 1,000 Hz, Supply voltage 6 … 30 V DC, Integrated cable, length 3 m, ending on stripped and tinned ends
Uniaxial Vibration Sensors
.
Sort by:
PCB-352C23/NC
- ICP®-miniature vibration sensor,
- Mass 0.2 grams.
- Mass-insulated,.
- Measuring range 1000 g,
- Sensitivity 5 mV / g,.
- Frequency range 2... 10,000 Hz,
- 3-56 female connector on the side.
- Without cable
PCB-3741F122G
- MEMS accelerometer
- Suitable for measuring static accelerations
- Measuring range ± 2 g pk (± 19.6m / s²)
- Sensitivity (± 3%) 1,350 mV / g (137.6mV / (m / s²))
- Frequency range (± 5%) 0 ... 250 Hz
- Supply voltage 5… 32 V DC
- Integrated connection cable, length 3 meters,
ending on stripped and tinned ends
PCB-352A92
- ICP® miniature shock sensor
- Mass 0.17 grams
- Measuring range 20,000 g
- Sensitivity 0.25 mV / g
- Continuous use temperature up to 163 ° C
- Frequency range 1.2... 10,000 Hz
- Integrated cable, length 0.9 m,
ending on 10-32 socket
PCB-352A26
- ICP®-miniature vibration sensor
- Mass 0.2 grams
- Mass-insulated
- Measuring range 500 g
- Sensitivity 10 mV / g
- Frequency range 2... 10,000 Hz
- 3-56 female connector on the side
- Including connection cable, length 3 m,
ending on 10-32 plug
PCB-EX357E93
- With ATEX / IECEx / CSA approval
- Vibration sensor with charge output
- Measuring axis perpendicular to the mounting screw
- Continuous operating temperature up to 649 ° C
- With through hole
- Measuring range 1,000 g
- Sensitivity 2.3 pC / g
- Upper limit frequency 3 kHz
- Integrated hardline connection cable, length 3 meters,
ending on 10-32 socket - New: slim 10-32 socket (diameter 6.35 mm)
PCB-352A91
- ICP® miniature shock sensor
- Mass 0.17 grams
- Measuring range 5,000 g
- Sensitivity 1 mV / g
- Continuous use temperature up to 163 ° C
- Frequency range 1.2... 10,000 Hz
- Integrated cable, length 0.9 m,
ending on 10-32 socket
PCB-3711F1110G
- MEMS DC accelerometer
- Suitable for measuring static accelerations
- Measuring range ± 10 g pk (± 98.1m / s²)
- Sensitivity (± 3%) 135 mV / g (13.8mV / (m / s²))
- Typical frequency range (± 5%) 0 ... 1,000 Hz
- Supply voltage 5… 32 V DC
- 4-pin connection socket on the side
PCB-3711F11200G
- MEMS DC accelerometer
- Suitable for measuring static accelerations
- Measuring range ± 200 g pk (± 1960m / s²)
- Sensitivity (± 3%) 6.75 mV / g (0.69mV / (m / s²))
- Typical frequency range (± 5%) 0… 1,500 Hz
- Supply voltage 5… 32 V DC
- 4-pin connection socket on the side
PCB-357A63
- Vibration sensor with charge output
- Continuous use temperature up to 482 ° C
- Radiation-resistant
- Measuring range 5,000 g
- Sensitivity 0.53 pC/g
- Upper frequency limit 10,000 Hz
- 10-32 socket side
PCB-3711F112G
- MEMS DC accelerometer
- Suitable for measuring static accelerations
- Measuring range ± 2 g pk (± 19.6m / s² pk)
- Sensitivity 675 mV / g (68.8 mV / (m / s²))
- Typical frequency range (± 5%) 0 ... 250 Hz
- Supply voltage 5… 32 V DC
- 4-pin connection socket on the side
PCB-357A94
- Vibration sensor with differential charge output
- Continuous use temperature up to 649 ° C
- With through hole
- Measuring range 1000 g
- 3.3 sensitivity pC/g
- Upper frequency limit 3,000 Hz
- Integrated hardline cable, length 3 m,
ending on 7/16-27 2-pin