PCB-357A95
- Vibration sensor with differential charge output
- Measuring axis perpendicular to the mounting screw
- Continuous use temperature up to 649 ° C
- With through hole
- Measuring range 1000 g
- 3.3 sensitivity pC/g
- Upper frequency limit 3,000 Hz
- Integrated hardline cable, length 3 m,
ending on 7/16-27 2-pin
| Specifications | |||
|---|---|---|---|
| Basic data | English units | SI units | |
| Sensitivity (±10 %) | 3.3 pC/g | 0.34 pC/(m/s²) | |
| Measuring range | ±1.000 gPK | ±9.800 m/s²PK | |
| Upper frequency limit (≤5 %) | 3 kHz | ||
| Upper cutoff frequency (±1 dB) | 5 kHz | ||
| Resonance frequency | ≥15.000 Hz | ||
| Linearity error (based on total measuring range) | ?1,0 % | ||
| Transverse acceleration sensitivity | ≤5 % | ||
| Conditions of use | |||
| Overload limit (shock) | ±2.000 gPK | ±19.600 m/s²PK | |
| Temperature range (operation) | -67... 1200 °F | -55... 649 ° C | |
| Temperature range (load limit) | -67... 1,400 ° F | -55... 760 ° C | |
| Temperature range (connector) | -67... 900 ° F | -55... 482 ° C | |
| Maximum exposure (Integrated neutron flux) | 10.000.000.000 N / cm² | ||
| Maximum exposure (integrated gamma flux) | 100,000,000 wheel | ||
| Technical characteristics | |||
| capacity | 520 pF | [3] [2] [1] | |
| Isolation resistance (at 649 ° C) | ≥10 kΩ | ||
| Isolation resistance (at 21 ° C) | |||
| Output polarity | Differential | [4] | |
| Electrical insulation | Signal from the housing isolated | ||
| Physical properties | |||
| Sensor element | UHT-12™ | ||
| Geometry of the sensor element | Shear principle | ||
| Housing material | Nickel alloy | ||
| Sealing (sensor housing) | Hermetic | ||
| Sealing (connector) | Hermetically sealed welded | ||
| Size - height | 0.56 in | 14.2 mm | |
| Size - length | 0.95 in | 24.1 mm | |
| Size - width | 0.56 in | 14.2 mm | |
| Weight (without cable) | 1.6 oz | 45 grams | [1] |
| Electrical connection | Integrated hardline cable | ||
| Cable length | 10 ft | 3.05 m | |
| Cable termination | 7/16-27 2-pin | ||
| Fixing | Through hole |
| Notes | |||
|---|---|---|---|
| [1] | Typically | ||
| [2] | Plus approx. 100 pF per additional meter cable | ||
| [3] | Plus approx. 50 pF per additional meter cable | ||
| [4] | Negative signal for positive acceleration |
| Included accessories | ||
|---|---|---|
| 081A116 | Mounting screw, 10-32 UNJF-3A, length 5/8 "", Inconel 718 | (1) |
| ACS-1 | Frequency response, traceable to NIST (10 Hz up to the upper 5%-Punkt) | (1) |
PCB-357A95
