Piezoelectric pressure sensors-

Piezoelectric Pressure Sensor

.

Showing 1-12 of 107 item(s)
Showing 1-12 of 107 item(s)

Active filters

PCB-176A05

  • Pressure sensor with charge output for detecting combustion instability in turbines,
  • With ATEX / CSA approval,
  • Continuous use temperature up to 520 ° C,
  • With UHT-12™ sensor element,
    (no popcorn noise),
  • Measuring range 5 bar,
  • Sensitivity 750 pC/bar,
  • Frequency range up to 8,000 Hz,
  • Integrated hardline cable, length 3 m,
    ending on 7/16-27-connector

PCB-176M03

  • Pressure sensor with charge output for detecting combustion instability in turbines,
  • With ATEX / CSA approval,
  • Continuous use temperature up to 530 ° C,
  • With UHT-12™ sensor element,
    (no popcorn noise),
  • Measurement range 1.4 bar,
  • Sensitivity 247 pC/bar,
  • Frequency range up to 10,000 Hz,
  • Integrated hardline cable,
    ending on 7/16-27-connector

PCB-176M07

  • Pressure sensor with charge output for detecting combustion instability in turbines,
  • With ATEX / CSA approval,
  • Continuous use temperature up to 530 ° C,
  • With UHT-12™ sensor element,
    (no popcorn noise)
  • Measurement range 1.4 bar,
  • Sensitivity 247 pC/bar,
  • Frequency range up to 1500 Hz,
  • Integrated hardline cable,
    ending on 7/16-27-connector

PCB-176M12

  • Pressure sensor with charge output for detecting combustion instability in turbines,
  • With ATEX / CSA approval,
  • Continuous use temperature up to 530 ° C,
  • With UHT-12™ sensor element,
    (no popcorn noise),
  • Measurement range 1.4 bar,
  • Sensitivity 247 pC/bar,
  • Frequency range up to 1500 Hz,
  • Integrated hardline cable,
    ending on 7/16-27-connector

PCB-132B38

  • Miniature-ICP® pressure sensor
  • Measuring range 345 kPa
  • Sensitivity 20.3 mV / kPa
  • Frequency range 11... 1,000 kHz
  • Integrated cable, length 3 m,
    ending on open ends

PCB-106B

  • Sub-miniature ICP® pressure sensor with stainless steel diaphragm
  • Measuring range 690 kPa
  • Sensitivity 7.3 mV / kPa
  • Lower limit frequency 0.5 Hz
  • Integrated connection cable

PCB-137B25

  • ICP® pressure sensor
  • For blast pressure measurements
  • Measuring range 345 kPa
  • Sensitivity 14.5 mV / kPa
  • 4-pin connector

PCB-137B26

  • ICP® pressure sensor
  • For blast pressure -and speed measurements
  • Measuring range 1724 kPa
  • Sensitivity 2.9 mV / kPa
  • 4-pin connector

PCB-137B27

  • Measurement Range: 500 psi (3447 kPa)
  • Sensitivity: (±15%) 10 mV/psi (1.45 mV/kPa)
  • Resonant Frequency: >=400 kHz
  • Electrical Connector: 4-Pin
  • Weight: 16.1 oz (456 gm)

PCB-137B28

  • Measurement Range: 1000 psi (6895 kPa)
  • Sensitivity: (±15%) 1 mV/psi (.145 mV/kPa)
  • Resonant Frequency: >=400 kHz
  • Electrical Connector: 4-Pin
  • Weight: 16.1 oz (456 gm)

PCB-176M09

  • Measurement Range: 20 psi (1.4 bar)
  • Sensitivity: (±20%) 17 pC/psi (247 pC/bar)
  • Sensing Element: UHT-12™
  • Temperature Range: -94 to 986 °F (-70 to 530 °C)
  • Electrical Connector: 7/16-27 2-Pin
  • Weight: 8.3 oz (235 gm)

PCB-176A02

  • Pressure sensor with charge output for detecting combustion instability in turbines,
  • With ATEX / CSA approval,
  • Continuous use temperature up to 650 ° C,
  • With UHT-12™ sensor element,
    (no popcorn noise),
  • Measurement range 50 bar,
  • Sensitivity 87 pC/bar,
  • Frequency range up to 20,000 Hz,
  • Integrated hardline cable, length 3 m,
    ending on 7/16-27-connector