• Ultrasound Camera: Intuitive, real-time localization of sound and ultrasound.

• 176 Microphones: Maximum sensitivity and outstanding dynamic range (200 kHz).

• Multi-Sensor: Combined live view of acoustics, optics, and thermography.

• Special Modes: Instant detection of compressed air leaks and partial discharges.

• Easy to Use: Sunlight-readable 7" touchscreen, ready for immediate operation.

• Fast Reporting: Automated PDF reports via PC software in just three steps.

• Suggestion according to DIN EN60068 and MIL-STD 810
• Noise (incl. mask/force limiting)
• Sine (incl. mask/force limiting, resonance search)
• Swing path and speed control
• Shock (with SRS and ext.) Pulse, Transientenerfassung)
• Layered stimulation (such as sinusoidal noise)
• "Road Load" simulation (any time signals)
• Recorder function (time data recording on hard disk)

• Accelerometer
• Measuring range ±2 g pk (±19.6 m/s² pk)
• Sensitivity (±3%) 1,350 mV/g (137.6 mV/(m/s²))
• Electrical connection: 8-pin
• Weight: 0.92 oz (26 g)

• multi-channel real-time FFT Analyzer,
• Recorder function (time data recording on hard disk),
• Modal analysis (SDOF, MDOF), impulse hammer test,
• Operating Deflection Shapes (ODS),
• Torsional vibration analysis,
• Measurement and analysis of sound,
• Pre-accession drive measurement (pass-by noise measurement)

• can be easily connected.
• 16 analog inputs and 2 analog outputs,
• Measurement range of ±10V, ±5V, ±1V, of ±2V,
• Sampling rate of 250kHz,
• 4 digital inputs / outputs, each
• NextView 4.5 live! free of charge in the scope of delivery,

• easy network integration (TCP/IP Protocol).
• 16 analog inputs (16-bit) and 2 analog outputs (16-bit),
• Measurement range of ±10V, ±5V, ±1V, of ±2V,
• High sampling rate (250kHz),
• 16 digital inputs / outputs, each
• Integrator 19-bit counter (Quadraturdekoder),

• 8-channel supply unit,
• Inputs: ICP® and voltage,
• Amplification factors 1 x, 10 x and 100 x,
• BNC-inputs and outputs

• Triaxial ICP® force sensor, 
• Measuring range (Z-axis) 0,111 kN, 
• Measuring range (X and Y axis) 0.044 kN, 
• Sensitivity (Z axis) 22.5 mV / N, 
• Sensitivity (X and Y axis) 112 mV / N, 
• Frequency range (Z-axis) 0.01 ... 90.000 Hz, 
• Frequency range (X and Y axis) 0.01 ... 90,000 Hz, 
• 4-pin connection socket on the side

MEMS ACCEL, TRIAXIAL, 3503A1120KG/015LY

• Sensitivity: (±50%)0.010 mV/g (0.001 mV/(m/s²))
• Measurement Range: ±20000 g (±196100 m/s² pk)
• Frequency Range: (1dB)0 to 10000 Hz
• Sensing Geometry: Full Active
• Mounting: Through Holes (2)
• Weight: 0.1 oz (2.83 gm)

• ICP®-miniature vibration sensor,
• Mass 0.2 grams.
• Mass-insulated,.
• Measuring range 1000 g,
• Sensitivity 5 mV / g,.
• Frequency range 2... 10,000 Hz,
• 3-56 female connector on the side.
• Without cable