PCB-078W30
- Protection class IP 68
- Shielded flexible four-wire cable
- Length 9 meters
- 4-pin connector to three BNC connectors
Sensors
.
Sort by:
PCB-3713F1110G
- Triaxial MEMS acceleration sensor
- Suitable for measuring static accelerations
- Measuring range ± 10 g pk (± 98.1m / s²)
- Sensitivity (± 3%) 135 mV / g (13.8mV / (m / s²))
- Typical frequency range (± 5%) 0 ... 1,000 Hz
- Supply voltage 5… 32 V DC
- 9-pin female connector on the side
PCB-176A02
- Pressure sensor with charge output for detecting combustion instability in turbines,
- With ATEX / CSA approval,
- Continuous use temperature up to 650 ° C,
- With UHT-12™ sensor element,
(no popcorn noise), - Measurement range 50 bar,
- Sensitivity 87 pC/bar,
- Frequency range up to 20,000 Hz,
- Integrated hardline cable, length 3 m,
ending on 7/16-27-connector
PCB-EX611A20
- Vibration sensor with charge output,
- With ATEX approval,
- Continuous use temperature up to 650 ° C,
- With through-holes
- Measuring range 200 g,
- Sensitivity 10 pC/g,.
- Upper frequency limit 3,700 Hz,
- Integrated hardline cable, length 3 m,
ending on LEMO connectors
PCB-137B25
- ICP® pressure sensor
- For blast pressure measurements
- Measuring range 345 kPa
- Sensitivity 14.5 mV / kPa
- 4-pin connector
PCB-604B11
- Triaxial industrial ICP® vibration sensor,
- With through hole,
- Measuring range 50 g,
- Sensitivity 100 mV / g,
- Frequency range 0.5 ... 5,000 Hz,
- One-point calibration at 100 Hz,
- 4-pin bayonet connector on the side,
- Integrated, waterproof connection cable, 3 m
PCB-EX357A95
- With ATEX / IECEx / CSA approval
- Vibration sensor with differential charge output
- Measuring axis perpendicular to the mounting screw
- Continuous operating temperature up to 649 ° C
- With through hole
- Measuring range 1,000 g
- Sensitivity 3.3 pC / g
- Upper limit frequency 3,000 Hz
- Integrated hardline connection cable, length 3 meters,
ending on 7 / 16-27 2-pin
PCB-078W50
- Protection class IP 68
- Shielded flexible four-wire cable
- Length 15 meters
- 4-pin connector to three BNC connectors
PCB-3713F112G
- Triaxial MEMS acceleration sensor
- Suitable for measuring static accelerations
- Measuring range ± 2 g pk (± 19.6m / s²)
- Sensitivity (± 3%) 675 mV / g (68.8mV / (m / s²))
- Typical frequency range (± 5%) 0 ... 250 Hz
- Supply voltage 5… 32 V DC
- 9-pin female connector on the side
Portable vibration calibrator (model 9110D)
- Portable system for calibration of vibration sensors
- Frequency range 5 ... 10,000 Hz
- adjustable amplitude
- LCD display in SI or US units
- Battery operation up to 18 hours
- Integrated ICP® supply and bias voltage display
- Signal input jack and output jack for reference signal
- Incl. Data storage and USB port for data export
PCB-176A03
- Pressure sensor with charge output for detecting combustion instability in turbines,
- With ATEX / CSA approval,
- Continuous use temperature up to 650 ° C,
- With UHT-12™ sensor element,
(no popcorn noise), - Measuring range 20 bar,
- Sensitivity 232 pC/bar,
- Frequency range up to 10,000 Hz,
- Integrated hardline cable, length 3 m,
ending on 7/16-27-connector
PCB-EX615A42
- Vibration sensor with charge output,
- With ATEX approval,
- Continuous use temperature up to 260 ° C,
- With through-holes
- Measuring range 200 g,
- Sensitivity 100 pC/g,
- Upper frequency limit 6,000 Hz,
- Integrated armored PTFE - cable, length 3 m,
ending on tinned ends