PCB-357A63
- Vibration sensor with charge output
- Continuous use temperature up to 482 ° C
- Radiation-resistant
- Measuring range 5,000 g
- Sensitivity 0.53 pC/g
- Upper frequency limit 10,000 Hz
- 10-32 socket side
Specifications | |||
---|---|---|---|
Basic data | English units | SI units | |
Sensitivity (±10 %) | 0.53 pC/g | 0,054 pC/(m/s²) | |
Measuring range | ±5.000 g pk | ±49.050 m/s² pk | |
Frequency range (±10 %) | 10,000 Hz | [2] | |
Resonance frequency | 45,000 Hz | [1] | |
Linearity error | ≤1 % | [3] | |
Transverse acceleration sensitivity | <3% | ||
Conditions of use | |||
Overload limit (shock) | ±5.000 g pk | ±49.050 m/s² pk | |
Temperature range | -65... 900 ° F | -54... 482 ° C | |
Strain sensitivity (footprint) | 0.003 g/µε | 0.02 (m/s²)/µε | [1] |
Maximum exposure (integrated neutron flux) | 10.000.000.000 N / cm² | ||
Maximum exposure (integral gamma River) | 100,000,000 wheel | ||
Technical properties | |||
capacity | 60 pF | [1] | |
insulation resistance (at 21 ° C) | > 1 GΩ | ||
insulation resistance (at 482 ° C) | > 1 MΩ | ||
output polarity | Positive | ||
electrical insulation | insulated signal from the housing | ||
physical properties | |||
sensor element | UHT-12™ | ||
Geometry of the sensor element | shear principle | ||
Housing material | Inconel | ||
Sealing | hermetic | ||
Size - height | 0.4 in | 10.2 mm | |
Size - length | 0.4 in | 10.2 mm | |
Size - width | 0.4 in | 10.2 mm | |
Mass | 0.31 oz | 8.7 grams | [1] |
Electrical connection | 10-32-coaxial socket | ||
Connecting position | side | ||
Mounting screw | 5-40 female |
information | |||
---|---|---|---|
[1] | Typically | ||
[2] | The lower cut-off frequency depends on the used signal conditioning electronics. | ||
[3] | Zero-balance just, determined using the method of least squares |
Included accessories | ||
---|---|---|
64287-01 | Mounting bolts 5-40 on 10-32 | (2) |
ACS-44 | Frequency response calibration | (1) |