PCB-034W10
- Protection class IP 68
- Shielded four-wire Teflon cable
- Length 3 meters
- 4-pin connector to three BNC connectors
Sort by:
PCB-3741F1230G
- MEMS accelerometer
- Suitable for measuring static accelerations
- Measuring range ± 30 g pk (± 294.2m / s²)
- Sensitivity (± 3%) 90 mV / g (9.17mV / (m / s²))
- Frequency range (± 5%) 0… 1,500 Hz
- Supply voltage 5… 32 V DC
- Integrated connection cable, length 3 meters,
ending on stripped and tinned ends
"On-Line" vibration monitor A3900 II
- measures vibration velocity (10 Hz... 1 kHz),
- measures vibration Acceleration (10 Hz... 1 kHz),
- measures RMS (RMS) and peak (peak),
- integrated sensor power supply, ICP®
- adjustable 4.. 20 mA current loop (active or passive),.
- programmable limit value (alert, alarm).
- RS-232 serial interface
PCB-356A61
- Triaxial ICP® miniature vibration sensor,
- With built-in low-pass filter,.
- Measuring range 500 g
- Sensitivity 10 mV / g,.
- Frequency range 2... 4,000 Hz,
- Weight 4 grams.
- Integrated cable, length 1.5 m,
ending on 4-pin female connector. - Including extension cable, length 1.5 m,
ending on three BNC plugs
PCB-356A43
- Triaxial ICP® miniature vibration sensor,
- With TEDS 1.0,
- Measuring range 500 g,
- Sensitivity 10 mV / g,
- Frequency range 0.4... 10,000 Hz,
- Dimensions 4.2 grams,
- 4-pin female connector on the side
PCB-176M03
- Pressure sensor with charge output for detecting combustion instability in turbines,
- With ATEX / CSA approval,
- Continuous use temperature up to 530 ° C,
- With UHT-12™ sensor element,
(no popcorn noise), - Measurement range 1.4 bar,
- Sensitivity 247 pC/bar,
- Frequency range up to 10,000 Hz,
- Integrated hardline cable,
ending on 7/16-27-connector
PCB-(M)202B
- ICP® force-load washer,
- Measuring range 1 kN,
- Sensitivity 4991 mV / kN,
- Frequency range 0.005 ... 65.000 Hz,
- 10-32 connector on the side
PCB-350B44
- Triaxial ICP® shock acceleration sensor
- Ground Isolated
- With electrical and mechanical filter
(-3 dB at 21,000 Hz) - Measuring range 5,000 g
- Sensitivity 1.0 mV / g
- Frequency range 0.4 ... 10,000 Hz
- Integrated connection cable, length 1.5 meters,
ending on 4-pin connection socket - Including extension cable, length 1.5 meters,
ending on three BNC plugs
PCB-034W20
- Protection class IP 68
- Shielded four-wire Teflon cable
- Length 6 meters
- 4-pin connector to three BNC connectors
PCB-3711F1150G
- MEMS accelerometer
- Suitable for measuring static accelerations
- Measuring range ± 50 g pk (± 490m / s²)
- Sensitivity (± 3%) 27 mV / g (2.8mV / (m / s²))
- Typical frequency range (± 5%) 0… 1,500 Hz
- Supply voltage 5… 32 V DC
- 4-pin connection socket on the side
PCB-3741F1250G
- MEMS accelerometer
- Suitable for measuring static accelerations
- Measuring range ± 50 g pk (± 490m / s²)
- Sensitivity (± 3%) 54 mV / g (5.5mV / (m / s²))
- Frequency range (± 5%) 0… 1,500 Hz
- Supply voltage 5… 32 V DC
- Integrated connection cable, length 3 meters,
ending on stripped and tinned ends