• Industrial ICP® vibration sensor 
  in 3- wire technology
• No ICP® sensor power required
• Measuring range 45 g
• Sensitivity 100 mV / g
• Frequency range 1.5 ... 10.000 Hz
• One-point calibration at 100 Hz
• Freely orientable integrated connection cable, length 3 meters, 
  ending on cut end

• ICP® strain sensor, 
• Measuring range 300 με, 
• Sensitivity 10 mV / με, 
• Lower limit frequency 0.004 Hz, 
• 10-32 connector on the side, 
• Masseisolierung

• Triaxial ICP® high temperature vibration sensor with low temperature coefficient
• Permanent operating temperature up to 180 ° C
• Sensitivity 10 mV / g
• Frequency range 2… 8,000 Hz
• Weight 4.2 grams
• 4-pin connection socket on the side
• Including connection cable, length 3 meters, ending on three BNC plugs

• MEMS DC accelerometer
• Suitable for measuring static accelerations
• Measuring range ± 10 g pk (± 98.1m / s²)
• Sensitivity (± 3%) 135 mV / g (13.8mV / (m / s²))
• Typical frequency range (± 5%) 0 ... 1,000 Hz
• Supply voltage 5… 32 V DC
• 4-pin connection socket on the side

• MEMS accelerometer
• Suitable for measuring static accelerations
• Measuring range ± 10 g pk (± 98.1m / s²)
• Sensitivity (± 3%) 270 mV / g (27.5mV / (m / s²))
• Frequency range (± 5%) 0 ... 1,000 Hz
• Supply voltage 5… 32 V DC
• Integrated connection cable, length 3 meters,
  ending on stripped and tinned ends

• Mini SmartShaker™ with integrated power amplifier,
• Power 31 N,.
• Frequency range 0... 9,000 Hz,
• Stroke 14 mm

• Triaxial ICP® miniature vibration sensor for vacuum applications,
• Low outgassing

,

• measuring range 1000 g,
• sensitivity 5 mV / g,
• frequency range 2 … 8,000 Hz,
• mass 1 gram,
• integrated cable, length 1.5 m, ending on 4 PIN Jack,
• including extension cable, length 6 meter, ending to three BNC

• Smaller and lighter, bags vibration Analyzer,
• No batteries required (powered by the PC),
• Memory size determined by the PC,
• Ideal for on the go and to teach

• 4 channels at the same time measure,
• FFT 3 '276' 800 lines in real time,
• Frequency range up to 90 kHz,
• 20 hours of recording 4 channels,
• ISO 10816-3 limits,
• Bearing database including,
• Input for Triaxial sensor,
• ACMT - slowly rotating bearing analysis,
• Individual frequency bands

• Triaxial ICP® miniature vibration sensor
• Mass-insulated housing
• With TEDS 1.0
• Measuring range 100 g
• Sensitivity 50mv / g
• Frequency range 0.4... 10,000 Hz
• Dimensions 4.2 grams
• 4-pin female connector on the side

• Triaxial vibration sensor with charge output
• Temperature range -55 ... 482 ° C
• Measuring range 500 g
• Sensitivity 3.2 pC / g
• Upper limit frequency 4,000 Hz
• Three 10-32 connector sockets
• With ATEX / CSA / IECEx approval