Showing 1765-1776 of 2042 item(s)
Showing 1765-1776 of 2042 item(s)

Active filters

PCB-(M)103B11

  • ICP® pressure sensor with stainless steel membrane,
  • For turbulence measurements,
  • Measuring range 68.6 kPa (190.7 dB),
  • Sensitivity 72.5 mV / kPa,
  • Lower limiting frequency 0.5 Hz,
  • Integrated cable, length 38 cm, ending on stripped and tinned ends

    PCB-(M)109C11

  • ICP® pressure sensor with ceramic-coated Cone,
  • For ballistic applications
  • Beschleunigungskompensiert,
  • Measuring range 552,000 kPa,
  • Sensitivity 0.01 mV / kPa,
  • Schockgeschützt up to 50,000 g,
  • 10-32 female connector
    • PCB-113B03

    • High frequency pressure sensor with INVAR membrane and charge output,
    • Beschleunigungskompensiert,
    • Measuring range 103.420 kPa,
    • Sensitivity 0.056 pC/kPa,
    • 10-32 socket
      • PCB-113B36

      • ICP® high frequency pressure sensor with INVAR-membrane /-housing,
      • Especially insensitive to temperature transients,
      • Beschleunigungskompensiert,
      • Measuring range 3,448 kPa,
      • Sensitivity 1.45 mV / kPa,
      • Lower limiting frequency 5.0 Hz,
      • 10-32 female connector
        • PCB-003G30

        • Low-Noise-Teflon coaxial cable
        • Length 9 meters
        • 5-44 plug on 10-32 plug
          • PCB-333B50

            • ICP®-modal vibration sensor,
            • Measuring range 5 g,
            • Sensitivity 1,000 mV / g,.
            • Frequency range 0.5... 3,000 Hz,
            • 10-32 socket side

              PCB-320C33

            • ICP® high-temperature vibration sensor,
            • Continuous use temperature up to 163 ° C,
            • Measurement range 50 g,
            • Sensitivity 100 mV/g,
            • Frequency range 1 … 4.000 Hz,
            • 10-32 female connector on the side
              • PCB-034G10

              • Four-wire Teflon shielded,
              • 3 meters,
              • 4-pin connector to three BNC
                • PCB-037P10

                • 10-conductor Teflon shielded,
                • 3 meters,
                • 9-pin connector on the open ends,
                • stripped and tinned
                  • PCB-393B04

                  • ICP® vibration sensor for seismic measurements,
                  • Measuring range 5 g,
                  • Sensitivity 1,000 mV / g,
                  • Frequency range 0.06 … 450 Hz,
                  • Wide band resolution 0.000003 g RMS,
                  • 10-32 female connector above
                    • PCB-054216-01144

                      • DMS miniature measuring washer
                        for the measurement of static forces,
                      • Screw diameter 16 mm,.
                      • Measuring range 140 kN
                      • Nominal 1.5 mV / V,.
                      • Integrated cable, length 1.5 m,
                        ending on open ends