PCB-010D10
connector/cable end 1 | |||
connector type | Male 4-pin | ||
contacts | female | ||
Connection method | coupling | ||
Mount | 1/4 "-28 cap ring | ||
strain relief | moulded spout | ||
" Temperature range | -76 … 325 ° F | -60 … 162.7 ° C | |
housing material | brass | ||
size - Tempe endurchmesser | 0.30 in | 7.6 mm | |
size - length | 1.0 in | 25 mm | |
mass | 0.11 oz | 3.0 grams | |
Connector/cable end 2 | |||
connector type | Male 4-pin | ||
contacts | female | ||
Connection method | Screw connection | ||
Mount | 1/4 "-28 cap ring | ||
strain relief | "Cast spout | ||
Temperature range | -76 … 325 ° F | -60 … 162.7 ° C | |
housing material | brass | ||
Size - od | 0.30 in | 7.6 mm | |
size - length | 1.0 in | 25 mm | |
mass | 0.11 oz | 3.0 grams | |
cable | |||
cable length | 10 ft | 3 m | |
cable type | Four-wire shielded cable | ||
Temperature range | -130 … 392 ° F | -90 …200 ° C | |
capacity (head to head at 21 ° C) | 16 pF / ft | pF/m for 52.4 | |
capacity (head on screen at 21 ° C) | 25.8 pF / ft | pF/m for 84.6 | |
maximum voltage (rms) | 160 V | ||
Diameter of the sheath | 0.1 in | 2.54 mm | [1] |
Coat material | FEP | ||
coat color | Blue | ||
Wire version | 7 fibers 38 AWG | ||
conductor | silver-plated copper alloy | ||
Conductor diameter (30 AWG) | 0.024 in | 0.61 mm | [1] |
Wire insulation | virgin PTFE | ||
shielding | braided (at least 90% covered) | ||
screen material | Silberbeschichtetes copper | ||
Screen diameter (each fiber 38 AWG) | 0.077 in | 1.95 mm | [1] |
minimum bending radius | 1 in | 25.4 mm | |
Mass | 0.16 | oz/ft/14.6 grams / m | [2] |
notes | |||
[1] | nominal | ||
[2] | typically |