PCB-078G10
| connector/cable end 1 | |||
| connector type | Male 4-pin | ||
| contacts | female | ||
| Connection method | coupling | ||
| Mount | 1/4 "-28 cap ring | ||
| strain relief | moulded spout | ||
| " Temperature range | -76 … 325 ° F | -60 … 162.7 ° C | |
| housing material | brass | ||
| size - Tempe endurchmesser | 0.30 in | 7.6 mm | |
| size - length | 1.0 in | 25 mm | |
| mass | 0.11 oz | 3.0 grams | |
| Connector/cable end 2 | |||
| cable termination | triple splitting on three coaxial cable | ||
| connector type | Three BNC connectors | ||
| Connector (signal) | male | ||
| connection method | bayonet | ||
| Strain relief | Cast spout | ||
| Temperature | -67 … 230 ° F | -55 … 110 ° C | |
| labels | ,X-axis, Y-axis, Z-axis | ||
| Size - length | 12 in | 30.5 cm | |
| cable | |||
| cable length | 10 ft | 3 m | |
| cable type | Shielded flexible four-wire cable | ||
| Vein running | twisted | ||
| temperature | -58 … 185 ° F | -50 … 85 ° C | |
| capacity (head to head at 21 ° C) | 14.0 pF / ft | pF/m for 47.0 | |
| capacity (head on screen at 21 ° C) | 24.8 pF / ft | pF/m for 81.0 | |
| Maximum voltage (rms) | 160 V | ||
| noise (pk-pk) | ≤ 30 mV | ||
| diameter of the cable sheath | 0,119 in | 3.02 mm | [1] |
| coat material | polyurethane | ||
| wire version | solid | ||
| conductor material | silver-platedCopper alloy | ||
| Conductor diameter (34 AWG) | 0.006 in | 0.16 mm | [1] |
| Conductor insulation | Virgin PTFE | ||
| Shielding | Braided (at least 90% covered) | ||
| Shielding material | Silver-coated wire | ||
| Screen diameter (each fibre 40 AWG) | 0.063 in | 1.60 mm | [1] |
| Minimum bending radius | 1.0 in | 30,00 mm | |
| Mass | 0.224 oz/ft | 20,834 grams / m | [1] |
| Notes | |||
| [1] | Typically |
PCB-078G10
