PCB-483C15
zoom_out_map

PCB-483C15

  • 8-channel supply unit,
  • Inputs: ICP® and voltage,
  • Amplification factors 1 x, 10 x and 100 x,
  • BNC-inputs and outputs
basic data
number of channels 8th
sensor types ICP, voltage [3]
Output range (maximum) ± 10 V
Lower limit frequency (-5%) 0.05 Hz [1]
Upper cut-off frequency (-3 dB) 50,000 Hz
Upper limit frequency (-5%) > 17,000 Hz
Phase shift (at 1,000 Hz) ± 1 °
Crosstalk (maximum) -72 dB
Display bias voltage / error (LEDs) Open circuit / short circuit / overload
Operating conditions
The temperature range (operation) 32 ... 122 ° F 0 ... 50 ° C
Technical characteristics
power supply mains voltage
Voltage (47 ... 63 Hz) 100 ... 240 V AC
current consumption A ?0,7
Supply voltage (for Sensor) (± 1 V DC ) 26 V DC
Constant current supply (for Sensor) 0 ... 20 mA [2]
Override threshold (± 1.0 V pk) ± 10/5 V pk [3]
DC offset <20 mV
output impedance 50 ?
Broadband noise (1x amplification factor) (1 ... 10,000 Hz) 5.6 uV rms [4]
Spectral Noise (1 Hz) 0.67 uV / Hz [4]
Spectral noise (10 Hz) 0.10 uV / Hz [4]
Spectral noise (100 Hz) 0.06 µV/ ?Hz [4]
Spectral noise (1,000 Hz) 0.06 µV/ ?Hz [4]
Spectral noise (10,000 Hz) 0.05 µV/ ?Hz [4]
Broadband noise (amplification factor 10x) (1 ... 10,000 Hz) 21 µV/ rms [4]
Spectral Noise (1 Hz) 5.10 uV / Hz [4]
Spectral noise (10 Hz) 0.60 uV / Hz [4]
Spectral noise (100 Hz) 0.22 uV / Hz [4]
Spectral noise (1,000 Hz) 0.22 uV / Hz [4]
Spectral noise (10,000 Hz) 0.19 uV / Hz [4]
Broadband noise (gain 100x) (1 ... 10000 Hz) 165 µV/ rms [4]
Spectral Noise (1 Hz) 57 µV/ ?Hz [4]
Spectral noise (10 Hz) 5.2 µV/ ?Hz [4]
Spectral noise (100 Hz) 1.7 uV / Hz [4]
Spectral noise (1,000 Hz) 1.8 uV / Hz [4]
Spectral noise (10,000 Hz) 1.4 µV/ ?Hz [4]
physical properties
Electrical connection (ICP® sensor input) BNC connector
Electrical connection (output) BNC connector
Electrical connection (mains voltage) IEC 320
Size - Height (nominal) 1.75 in 44.5 mm
Size - Width (nominal) 19 in 482.6 mm
Size - depth (nominal) 13.7 in 348 mm
Dimensions 6.25 lb 2.83 kg
Hints
[1] Tolerance of the lower limit frequency: ± 25%
[2] Configurable via two potentiometers for every four channels Default setting: 4 mA (± 0.5 mA)
[3] Adjustable via internal jumpers
[4] typically,
[5] Details: see PCB Declaration of Conformance PS024
included supply
017AXX power cable -1
PCB-483C15

Specific References

Download

483C15_drawing.PDF

Technical drawing

Download (533.36k)

483C15_manual.PDF

Operating instructions

Download (955.35k)

483C15_specs.PDF

Technical data sheet

Download (30.78k)