Miniature ICP® force sensor, 10 sec DTC, 2.2 lb comp., 1 lb tension, 2200 mV/lb

• Measurement Range: 2.2 lb (0.00979 kN)
• Sensitivity: (±15%)2200 mV/lb (494604 mV/kN)
• Low Frequency Response: (-5%)0.05 Hz
• Upper Frequency Limit: 30000 Hz
• Temperature Range: -65 to +250 °F (-54 to +121 °C)
• Mounting Thread: 10-32 Female (No Metric Equivalent)

Triax force link, charge, 10k lb (Fz), 4k lb (Fx,y), 15 pC/lb (z), 32 pC/lb (x,y), ground isolated

• Temperature Range: -100 to +350 °F (-73 to +177 °C)
• Electrical Connector: 10-32 Coaxial Jack

Triaxial MEMS Shock accelerometer, 20k g, surface mount

• Sensitivity: (±50%)0.005 mV/g (0.0005 mV/(m/s²))
• Measurement Range: ±20000 g (±196133 m/s² pk)
• Frequency Range: (1dB)0 to 10000 Hz
• Sensing Geometry: Full Active
• Mounting: Surface Mount
• Weight: 0.029 oz (0.82 gm)

Low Outgassing, Triaxial, high sensitivity, ceramic shear ICP® accel., 500 mV/g, 0.5 to 3k Hz, titanium hsg, 4-pin conn.

• Sensitivity: (±10%)500 mV/g (51 mV/(m/s²))
• Measurement Range: ±10 g pk (±98 m/s² pk)
• Electrical Connector: 1/4-28 4-Pin

MEMS DC ACCEL, 3741F1210G/050JJ

• Sensitivity: (±3%)270 mV/g (27.5 mV/(m/s²))
• Measurement Range: ±10 g pk (±98.1 m/s² pk)
• Broadband Resolution: 0.35 mg rms (0.0034 m/s² rms)
• Temperature Range: -65 to 250 °F (-54.0 to 121 °C)
• Frequency Range: (±5%)0 to 1000 Hz
• Electrical Connector: Integral Cable

377C20 microphone paired with a 426A14 preamplifier

• Nominal Microphone Diameter: 1/2"
• Frequency Response Characteristic: Random Incidence
• Frequency Range: (±2dB)3.15 to 16000 Hz
• Inherent Noise: 14 dB(A) re 20 µPa
• Dynamic Range: 146 dB re 20 µPa

PT Connector, 10-Socket Mating

ICP® sensor simulator, 100 Hz sine and square wave, 0 to 10 V pk-pk adj. output

DIN rail mount strain gage signal conditioner, +/- 10 V & 4 to 20 mA outputs, calibrated in current, 10 VDC bridge excitation voltage, switch activated shunt, 12 to 28 VDC operation,

Impact cap, hemispherical (for Model 208A35)

Cable, Transducer, RST Instrument to PT-10P Connector, 16-feet Straight

Fastener Test Plate Set, Standard Hardness, #10 fasteners