PCB-2301-02A
    zoom_out_map

      PCB-2301-02A

      PCB L&T Reaction Torque Transducer, 5,000 in-lb/417 ft-lb (565 N-m) rated capacity, 50% static overload protection, 4-in (101.6 mm) Steel Flange

      • Measurement Range: 5000 lbf-in (565 Nm)
      • Sensitivity: (±15%)2 mV/V (2 mV/V)
      • Mounting: Flange (5/16in Bolts) (Flange (M8 Bolts))
      • Size - Diameter: 4.00 in (101.6 mm)
      • Size - Length: 3.00 in (76.2 mm)
      • Torsional Stiffness: 1290 klbf-in/radian (145.7 kN-m/radian)

      Specification Notes

      [1] Nominal.
      [2] FS - Full Scale.
      [3] Singularly applied, i.e. no other extraneous loads.
      [4] Over compensated operating temperature range.
      [1] Nominal.
      [5] Calibrated at 10 VDC, usable 5 to 20 VDC or VAC RMS.
      [6] See Drawing 26440 for Complete Dimensions

      English:SI:
      Performance
      Measurement Range (Full Scale Capacity)5000 lbf-in565 Nm [1]
      Sensitivity (±15 %) (output at rated capacity)2 mV/V2 mV/V [1] [2]
      Non-Linearity≤0.1 % FS≤0.1 % FS [2]
      Hysteresis≤0.1 % FS≤0.1 % FS [2]
      Non-Repeatability≤0.02 % FS≤0.02 % FS [2]
      Resonant Frequency1.8 kHz1.8 kHz
      Maximum Torque7500 lbf-in847 Nm
      Environmental
      Overload Limit (Axial Thrust)5000 lbf22.2 kN [3]
      Overload Limit (Overhung Moment)2500 lbf-in282 Nm [3]
      Overload Limit (Shear)2500 lbf11.1 kN [3]
      Temperature Range (Operating)-65 to +200 °F-54 to +93 °C
      Temperature Range (Compensated)+70 to +170 °F+21 to +77 °C
      Temperature Effect on Output (Maximum)±0.002 %Reading/°F±0.0036 %Reading/°C [4]
      Temperature Effect on Zero Balance (Maximum)±0.002 %FS/°F±0.0036 %FS/°C [2] [4]
      Electrical
      Bridge Resistance350 Ohm350 Ohm [1]
      Excitation Voltage (Recommended)10 VDC10 VDC [5]
      Insulation Resistance5 GOhm5 GOhm
      Zero Balance≤1 %RO≤1 %RO
      Output Polaritycw+cw+
      Physical
      Size - Diameter4.00 in101.6 mm [6]
      Size - Length3.00 in76.2 mm [6]
      Weight5 lb2.268 kg
      MountingFlange (5/16in Bolts)Flange (M8 Bolts)
      Torsional Stiffness1290 klbf-in/radian145.7 kN-m/radian
      Sensing ElementStrain GageStrain Gage
      Housing MaterialAnodized AluminumAnodized Aluminum
      Sensor Materialplated steelplated steel
      Electrical ConnectorPT02E-10-6PPT02E-10-6P

      * All specifications are at room temperature unless otherwise specified.

      Accessories

      Supplied
      181-012AMating conn., 6-socket (F) w/strain relief for sensors with PT conn.1
      PCB-2301-02A

      Specific References

      Download

      2301-02a_specs.pdf

      PCB-2301-02A_specs

      Download (1.38M)

      2301-02a_manual.pdf

      PCB-2301-02A_manual

      Download (1.38M)

      26439-b_drawings.pdf

      PCB-2301-02A_drawings

      Download (269.58k)