Fastener Testing Plate Set, Standard Hardness, 5/16-in

Cryogenic ICP pressure sensor, 1000 psi, 5 mV/psi, 3/8-24 mtg thd, ground isolated with lockwire hole on clamp nut and outer adaptor

• Measurement Range: 1 kpsi (6895 kPa)
• Sensitivity: 5.0 mV/psi (0.725 mV/kPa)
• Low Frequency Response: (-5%)0.25 Hz
• Resonant Frequency: >=250 kHz (>=250 kHz)
• Electrical Connector: 10-32 Coaxial Jack (10-32 Coaxial Jack)
• Weight: .388 oz (11.00 gm)

PCB L&T load cell, low profile, 25,000 lbf rated capacity, 50% overload protection, 4.0mV/V output 1 1/4-12 UNF thread, PTO2E-10-6P connector with mounting base

PCB L&T fatigue rated load cell, low profile, 500 lbf rated capacity, 300% overload protection, 1.0mV/V output 5/8-18 UNF-2B thread, PTO2E-10-6P connector with mounting base.

PCB L&T S-Type Load Cell, 5,000 lbf rated capacity, 150% of RO static overload protection, 2mV/V output, 5/8-18 UNF threads, integral 10 ft cable w/ open end, nickel-plated steel

• Measurement Range: 5000 lb (22.2 kN)
• Size - Height: 3.50 in (89 mm)
• Electrical Connector: 10 ft - Integrated Cable

Mold ejector pin force sensor, 560 lb comp., 20 pC/lb, charge output

• Sensitivity: (±15%)20 pC/lb (4497 pC/kN)
• Upper Frequency Limit: 140000 Hz
• Temperature Range: -300 to +400 °F (-184 to +204 °C)
• Weight: 0.042 oz (1.2 gm)

MEMS shock accelerometer, 60 kg, 1/4-28 stud mount, 096 integral cable (side exit), length 10-ft pigtails

• Sensitivity: (±50%)0.003 mV/g (0.0003 mV/(m/s²))
• Measurement Range: ±60000 g (±588400 m/s² pk)
• Frequency Range: (1dB)0 to 20000 Hz
• Sensing Geometry: Full Active
• Mounting: Integral Stud
• Weight: 0.088 oz (2.5 gm)

ICP® Triaxial shock accelerometer, 1.0 mV/g, 5k g range, mechanically isolated and electrically filtered, 5-ft integral cable, no mating cable supplied

• Sensitivity: (±30%)1.0 mV/g (.1 mV/(m/s²))
• Measurement Range: ±5000 g pk (±49000 m/s² pk)
• Frequency Range: (±1dB)0.4 to 10000 Hz
• Electrical Connector: Integral Cable (Integral Cable)

MEMS DC ACCEL, 3711F1250G/020DZ

• Sensitivity: (±3%)27 mV/g (2.8 mV/(m/s²))
• Measurement Range: ±50 g pk (±490 m/s² pk)
• Broadband Resolution: 1.5 mg rms (0.015 m/s² rms)
• Temperature Range: -65 to +250 °F (-54.0 to +121 °C)
• Frequency Range: (±5%)0 to 1500 Hz
• Electrical Connector: Integral Cable (Integral Cable)

MEMS DC ACCEL, 3741F1230G/M010JJ

• Sensitivity: (±3%)90 mV/g (9.17 mV/(m/s²))
• Measurement Range: ±30 g pk (±294.2 m/s² pk)
• Broadband Resolution: 0.85 mg rms (0.0083 m/s² rms)
• Temperature Range: -65 to 250 °F (-54.0 to 121 °C)
• Frequency Range: (±5%)0 to 1500 Hz
• Electrical Connector: Integral Cable

Rugged Microphone Kit, 378C20 Microphone & Preamplifier, 079A52 Rugged Grid Cap & 079A59 Calibration Adapter

• Nominal Microphone Diameter: 1/2"
• Frequency Response Characteristic: Random Incidence
• Frequency Range: (±2dB)3.75 to 16000 Hz
• Dynamic Range: 137 dB re 20 µPa

Low pass plug-in filter, 2 kHz (-3dB point)

• Product Type: Accessory