PCB-351B14

Cryogenic, miniature, quartz shear ICP® accel., 5 mV/g, 1 to 8k Hz, 10-32 top conn. (-320 to +250F/-196 to +121C)

Sensitivity: (±10%)5 mV/g (0.51 mV/(m/s²))
Measurement Range: ±300 g pk (±2943 m/s² pk)
Broadband Resolution: 0.01 g rms (0.1 m/s² rms)
Frequency Range: (±5%)1 to 8000 Hz
Sensing Element: Quartz
Weight: 0.06 oz (1.8 gm)

Specification Notes

[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] Transverse sensitivity is typically ≤ 3%.
[2] Typical.
[4] See PCB Declaration of Conformance PS023 for details.

	English:	SI:
Performance
Sensitivity (±10 %)	5 mV/g	0.51 mV/(m/s²)
Measurement Range	±300 g pk	±2943 m/s² pk
Frequency Range (±5 %)	1 to 8000 Hz	1 to 8000 Hz
Frequency Range (±10 %)	0.7 to 10000 Hz	0.7 to 10000 Hz
Frequency Range (±3 dB)	0.35 to 20000 Hz	0.35 to 20000 Hz
Resonant Frequency	≥40 kHz	≥40 kHz
Broadband Resolution (1)	0.01 g rms	0.1 m/s² rms	[2]
Non-Linearity	1 %	1 %	[1]
Transverse Sensitivity	≤5 %	≤5 %	[3]
Environmental
Overload Limit	±10000 g pk	±98100 m/s² pk
Temperature Range	-320 to +250 °F	-196 to +121 °C
Temperature Response	See Graph %/°F	See Graph %/°F	[2]
Base Strain Sensitivity	≤0.005 g/µε	≤0.05 (m/s²)/µε	[2]
Electrical
Excitation Voltage	20 to 30 VDC	20 to 30 VDC
Constant Current Excitation	2 to 20 mA	2 to 20 mA
Output Impedance	≤200 Ohm	≤200 Ohm
Output Bias Voltage	3 to 10 VDC	3 to 10 VDC
Discharge Time Constant	0.5 to 2.0 sec	0.5 to 2.0 sec
Spectral Noise (1 Hz)	2000 µg/√Hz	19620 (µm/sec²)/√Hz	[2]
Spectral Noise (10 Hz)	400 µg/√Hz	3924 (µm/sec²)/√Hz	[2]
Spectral Noise (100 Hz)	120 µg/√Hz	1177 (µm/sec²)/√Hz	[2]
Spectral Noise (1 kHz)	30 µg/√Hz	294 (µm/sec²)/√Hz	[2]
Physical
Size - Height	0.74 in	18.8 mm
Size - Hex	0.28 in	7.1 mm
Weight	0.06 oz	1.8 gm	[2]
Sensing Element	Quartz	Quartz
Sensing Geometry	Shear	Shear
Housing Material	Titanium	Titanium
Sealing	Hermetic	Hermetic
Electrical Connector	10-32 Coaxial Jack	10-32 Coaxial Jack
Electrical Connection Position	Top	Top
Mounting Thread	5-40 Male	5-40 Male
Mounting Torque	8 to 12 in-lb	90 to 135 N-cm

* All specifications are at room temperature unless otherwise specified.

Accessories


Supplied
ACS-1	Single axis amplitude response calibration from 10 Hz to upper 5% frequency, NIST traceable	1

Optional Versions

(J) Ground Isolated

	English	SI
Frequency Range	8000 Hz	8 Hz
Frequency Range	10000 Hz	10 Hz
Resonant Frequency	36 kHz
Electrical Isolation	>100000000 Ohm
Size - Hex	0.37 in	9.5 mm
Size - Height	0.86 in	21.8 mm
Weight	0.10 oz	3.0 gm