Multi-purpose ICP® force sensor, 1k lb comp., 500 lb tension, 5 mV/lb, axial conn.

• Measurement Range: 1000 lb (4.448 kN)
• Sensitivity: (±15%)5 mV/lb (1124 mV/kN)
• Low Frequency Response: (-5%)0.0003 Hz
• Upper Frequency Limit: 36000 Hz
• Temperature Range: -65 to +250 °F (-54 to +121 °C)

Triax force link, ICP®, 10k lb (Fz), 4k lb (Fx,y), 0.25 mV/lb (z), 1.25 mV/lb (x,y), ground isolated

• Temperature Range: -65 to +250 °F (-54 to +121 °C)
• Electrical Connector: 4-Pin

Triaxial MEMS Shock accelerometer, 60kG, thru hole mount, 20-ft integral cable to triple splice assembly with (3) 1-ft 4-cond. cables each with a 8-pin mini DIN (LN), 4-wire bridge

• Sensitivity: (±50%)0.003 mV/g (0.0003 mV/(m/s²))
• Measurement Range: ±60000 g (±588400 m/s² pk)
• Frequency Range: (1dB)0 to 10000
• Sensing Geometry: Full Active
• Mounting: Through Holes (2)
• Weight: 0.1 oz (2.83 gm)

Miniature ring-style, ceramic shear ICP® accel., 100 mV/g, 7 to 10k Hz, integral waterproof cable, 20-ft twisted shielded pair to pigtails, case isolated

• Sensitivity: (±10%)100 mV/g (10.2 mV/(m/s²))
• Measurement Range: ±50 g pk (±491 m/s² pk)
• Broadband Resolution: 0.001 g rms (0.01 m/s² rms)
• Frequency Range: (±5%)7 to 9000 Hz
• Sensing Element: Ceramic
• Weight: .13 oz (3.6 gm)

Differential MEMS DC accelerometer, 27 mV/g, 100 g, 10 ft integral cable

• Sensitivity: (±3%)27 mV/g (2.75 mV/(m/s²))
• Measurement Range: ±100 g pk (±980.7 m/s² pk)
• Broadband Resolution: 3.5 mg rms (.034 m/s² rms)
• Temperature Range: -65 to 250 °F (-54.0 to 121 °C)
• Frequency Range: (±5%)0 to 1500 Hz
• Electrical Connector: Integral Cable

1 in prepolarized pressure microphone

• Nominal Microphone Diameter: 1"
• Frequency Response Characteristic: Pressure
• Frequency Range: (+/-2dB)5 to 8000 Hz
• Inherent Noise: 10 dB(A) re 20 µPa
• Dynamic Range: >150 dB re 20 µPa

PCB L&T Torque Sensor, Rotary Transformer, 2000 in-lb Capacity FS, Flanges and Splines per AND10262 & AND20002

• Measurement Range: 2000 in-lb (225 Nm)
• Sensitivity: (±15%)2.5 mV/V (2.5 mV/V)
• Non-Linearity: <=0.05 % FS
• Mounting: Flange w/ Splined Shaft
• Maximum Speed: 15000 RPM

Universal AC power adapter, 100-240 VAC/ 50-60 Hz input, 33 VDC output, 5-pin DIN (for models 482C05 and 482C15), line cord

• Output Voltage: 32 - 38 VDC
• Output Current: 0.54 Amps

PCB L&T 5-digit red LED display, 1/8 DIN panel mount strain gage signal conditioner, 10 VDC excitation, 1.5 mV/V full scale, 4 set points, +/-10 VDC & 4 to 20 mA outputs, CE

Impact cap, hemispherical (for Model 208A33)

Cable, LabMaster Portable to Thread Torque-Fastener Tension Load Cell, 10-feet Straight

Cable, LabMaster to Thread Torque-Fastener Tension Load Cell, 10-feet Straight