PCB-3991B1160KG/010LN
ACCELEROMETER, 3991B1160KG/010LN
- Sensitivity: (±50%)0.003 mV/g (0.0003 mV/(m/s²))
- Measurement Range: ±0 to 60000 g (±0 to 588400 m/s² pk)
- Frequency Range: (1dB)0 to 20000 Hz
- Sensing Geometry: Full Active
- Mounting: Through Holes (2)
- Weight: 0.045 oz (1.28 gm)
Specification Notes
[1] Typical.
[2] Verified with test data provided on supplied calibration certificate.
[3] Sensitivity is proportional to excitation voltage, and at other excitation values, sensitivity can be predicted from the 10VDC calibrated value with a small (<~.5%) increase in uncertainty.
[1] Typical.
[4] -65 to +250 °F, ref. 75 °F (-54 to +121 °C, ref. 24 °C)
[5] Half-sine pulse duration, >= 20 µsec.
[1] Typical.
[6] Settling Time is the maximum time after power-up for the Offset Voltage to be within +/-2% of Measurement Range output of the final offset value. Mounting surface must be at thermal equilibrium.
[2] Verified with test data provided on supplied calibration certificate.
[7] Individually tested to ensure compliance with specified value.
[1] Typical.
[8] See PCB Declaration of Conformance PS165 for details.
| English: | SI: | ||
|---|---|---|---|
| Performance | |||
| Sensitivity (±50 %) (at 10 VDC excitation) | 0.003 mV/g | 0.0003 mV/(m/s²) | [2] |
| Sensitivity | 0.0003 mV/V/g | 0.00003 mV/V/(m/s²) | [3] |
| Measurement Range | ±0 to 60000 g | ±0 to 588400 m/s² pk | |
| Frequency Range (1 dB) | 0 to 20000 Hz | 0 to 20000 Hz | |
| Resonant Frequency | >120 kHz | >120 kHz | |
| Damping Ratio | 2 % Critical | 2 % Critical | [1] |
| Non-Linearity (per 10,000 g (98,100 m/s²)) | ≤1 % | ≤1 % | |
| Transverse Sensitivity | ≤3 % | ≤3 % | |
| Environmental | |||
| Overload Limit (Shock) | ±100000 g pk | ±980665 m/s² pk | [5] |
| Overload Limit (Mechanical Stops) | ≥80000 g | ≥782534 m/s² pk | |
| Temperature Range (Operating) | -65 to 250 °F | -54 to 121 °C | |
| Temperature Coefficient of Sensitivity | -0.11 %/°F | -0.20 %/°C | [1] |
| Zero g Offset Temperature Shift | ±10 mV | ±10 mV | [4] |
| Base Strain Sensitivity | .3 g/µε | 2.94 (m/s²)/µε | [1] |
| Electrical | |||
| Excitation Voltage (Maximum) | 15.0 VDC | 15.0 VDC | |
| Current Consumption | <3 mA | <3 mA | |
| Input Resistance (±2000 Ohm) | 6000 Ohm | 6000 Ohm | [1] [2] |
| Output Resistance (±2000 Ohm) | 6000 Ohm | 6000 Ohm | [1] [2] |
| Offset Voltage | ±40 mVDC | ±40 mVDC | [2] |
| Settling Time | 0.01 sec | 0.01 sec | [6] |
| Electrical Isolation (Case) | ≥10000000 Ohm | ≥10000000 Ohm | [7] |
| Physical | |||
| Sensing Element | Piezoresistive MEMS | Piezoresistive MEMS | |
| Sensing Geometry | Full Active | Full Active | |
| Housing Material | Titanium | Titanium | |
| Sealing | Epoxy | Epoxy | |
| Size - Height | 0.120 in | 3.05 mm | |
| Size - Length | 0.56 in | 14.22 mm | |
| Size - Width | 0.28 in | 7.11 mm | |
| Weight (without cable) | 0.045 oz | 1.28 gm | [1] |
| Electrical Connector | Integral Cable | Integral Cable | |
| Electrical Connection Position | Side | Side | |
| Cable Type | 096 4-cond silicone jacket | 096 4-cond silicone jacket | |
| Cable Termination | Pigtail Ends | Pigtail Ends | |
| Cable Length | 10 ft | 3.05 m | |
| Mounting | Through Holes (2) | Through Holes (2) | |
* All specifications are at room temperature unless otherwise specified.
Accessories
| Supplied | ||
| ACS-62 | Calibration of High G PR Accelerometer, 10.0 VDC excitation | 1 |
| 081A110 | 4-40 x 1/4" socket head cap screw and washer for Series 3991 | 2 |
PCB-3991B1160KG/010LN
