Triaxial MEMS DC accelerometer, 7 mV/g, 200 g, 10 ft integral cable

• Sensitivity: (±3%)6.75 mV/g (0.69 mV/(m/s²))
• Measurement Range: ±200 g pk (±1962.0 m/s² pk)
• Electrical Connector: Integral Cable (Integral Cable)
• Weight: 4.2 oz (119 gm)

377C10, 0.25 inch microphone with a 426A07 short preamplifier, and system calibration with TEDS

• Nominal Microphone Diameter: 1/4"
• Frequency Response Characteristic: Pressure
• Frequency Range: (±2dB)5 to 70000 Hz (5 to 70000 Hz)
• Dynamic Range: 173 dB re 20 µPa

1-channel, line-powered, ICP® sensor signal cond., gain x1, x10, x100, BNC input/output conn.

• Channels: 1
• Voltage Gain: (±1%)x1 x10 x100

Precision Cal Resistor 43.575K Ohm

Cable assembly for sensors with PT conn. and Series 8159, 20-ft, PT conn. to 9-pin(M) D-sub conn., 8-cond. cable

Impact cap, convex (for Series 208)

Cable, RS Transducer, PT 4S to Pigtail 6-feet straight

Cable, LabMaster to 10-Pin Transducer, 10-feet Straight

Fastener Testing Plate Set, Standard, M10

PCB L&T Canister load cell, 300 lbf (1334 N) rated capacity, 50% static overload protection, 2mV/V output, 1/4-28 UNF-2B threads, PT02E-10-6P connector, aluminum construction

• Measurement Range: 300 lb (1334 N)
• Size - Diameter: 2.75 in (69.9 mm)
• Size - Height: 1.5 in (38.1 mm)
• Electrical Connector: PT02E-10-6P

Quartz, free-field, ICP® blast pressure pencil probe, front sensor is 250 psi, 20 mV/psi, rear sensor is a placebo, 4-pin connector

• Measurement Range: 250 psi (1724 kPa)
• Sensitivity: (±15%)20 mV/psi (2.90 mV/kPa)
• Resonant Frequency: >=400 kHz
• Electrical Connector: 4-Pin
• Weight: 16.1 oz (456 gm)

PCB L&T fatigue rated low cell low profile, 12.5 klbf rated capacity, 300% overload protection, 2.0 mv/v output, 1 1/4-12 UNF-2B thread PT02E-10-6P connector with mounting base.