PCB-1903-02A
Load Cell, Side Force, 100 Lb FS, Integral Cable with pigtails, Stainless Steel Construction, GSE/RS standard wiring code
- Measurement Range: 100 lbf (445 N)
- Size - Diameter: 1.50 in (38.1 mm)
- Size - Height: 1.25 in (31.75 mm)
Specification Notes
[1] FS - Full Scale.
[2] RO - Rated Output.
[3] Over compensated operating temperature range.
[4] Nominal.
[5] Calibrated at 10 VDC, usable 3 to 20 VDC or VAC RMS.
[6] See Outline Drawing 58830 for Complete Dimensions.
| English: | SI: | ||
|---|---|---|---|
| Performance | |||
| Measurement Range | 100 lbf | 445 N | [1] |
| Sensitivity (10 %) | 1.3 mV/V | 1.3 mV/V | [2] |
| Non-Linearity | ≤0.10 % FS | ≤0.10 % FS | |
| Hysteresis | ≤0.10 % FS | ≤0.10 % FS | |
| Non-Repeatability | ≤0.02 %RO | ≤0.02 %RO | |
| Environmental | |||
| Overload Limit | 150 lbf | 667 N | |
| Temperature Range (Operating) | -65 to +200 °F | -54 to +93 °C | |
| Temperature Range (Compensated) | +70 to +170 °F | +21 to +77 °C | |
| Temperature Effect on Output (Maximum) | ±0.002 %Reading/°F | ±0.0036 %Reading/°C | [3] |
| Temperature Effect on Zero Balance (Maximum) | ±0.001 %FS/°F | ±0.0018 %FS/°C | [3] |
| Electrical | |||
| Bridge Resistance | 2000 Ohm | 2000 Ohm | [4] |
| Excitation Voltage (Recommended) | 10 VDC | 10 VDC | [5] |
| Insulation Resistance | >5000000000 Ohm | >5000000000 Ohm | |
| Zero Balance | ≤1 % FS | ≤1 % FS | |
| Output Polarity (Tension ) | Negative | Negative | |
| Physical | |||
| Size - Height | 1.25 in | 31.75 mm | [6] |
| Size - Diameter | 1.50 in | 38.1 mm | [6] |
| Weight | 0.30 lb | 0.13 kg | |
| Mounting Thread | #4-40 Female | No Metric Equivalent | |
| Housing Material | Aluminum | Aluminum | |
| Sensing Element | Strain Gage | Strain Gage | |
| Deflection at Full Scale Capacity | 0.004 in | 0.12 mm | |
| Electrical Connector | pigtail ends | pigtail ends | |
| Electrical Connection Position | Bottom | Bottom | |
* All specifications are at room temperature unless otherwise specified.
PCB-1903-02A
