PCB-1403-15A
PCB L&T fatigue rated load cell low profile, 5 klbf rated capacity 300% overload protection 2.0mv/v output 5/8-18 UNF-2B thread PT02E-10-6P connector
- Measurement Range: 5000 lb (22 kN)
- Size - Diameter: 4.12 in (104.6 mm)
- Size - Height: 2.50 in (63.5 mm)
- Electrical Connector: PT02E-10-6P
Specification Notes
[1] Nominal.
[2] FS - Full Scale.
[3] RO - Rated Output.
[4] Calibrated in tension and compression.
[5] Performance specifications guaranteed with factory installed optional Tension Base 084A100
[6] Singularly applied, i.e. no other extraneous loads.
[7] Over compensated operating temperature range.
[1] Nominal.
[3] RO - Rated Output.
[8] Calibrated at 10 VDC, usable 5 to 20 VDC or VAC RMS.
[9] See Outline Drawing 49932 for Complete Dimensions
| English: | SI: | ||
|---|---|---|---|
| Performance | |||
| Measurement Range (100 x 10^6 cycles) | 5000 lb | 22 kN | [2] [4] |
| Sensitivity (±10 %) (RO) | 2.0 mV/V | 2.0 mV/V | [1] [3] |
| Non-Linearity | ≤0.04 % FS | ≤0.04 % FS | [2] [5] |
| Hysteresis | ≤0.04 % FS | ≤0.04 % FS | [2] [5] |
| Non-Repeatability | ≤0.02 %RO | ≤0.02 %RO | [3] [5] |
| Creep (in 20 minutes) | 0.025 % | 0.025 % | [5] |
| Static Error Band | ≤0.04 % FS | ≤0.04 % FS | [2] [5] |
| Eccentric Load Sensitivity | 0.1 %/in | 0.1 %/25.4mm | [5] |
| Resonant Frequency | 10 kHz | 10 kHz | |
| Side Load Sensitivity | 0.1 %/in | 0.1 %/25.4mm | [5] |
| Environmental | |||
| Overload Limit | 15 klb | 67 kN | |
| Load Limit (Side Force, FX or FY) | 10 klbf | 44 kN | [6] |
| Load Limit (Bending Moment, MX or MY) | 10 klbf-in | 1130 Nm | [6] |
| Load Limit (Axial Torque, MZ) | 10 klbf-in | 1130 Nm | [6] |
| Temperature Range (Operating) | -65 to +200 °F | -54 to +93 °C | |
| Temperature Range (Compensated) | +15 to +115 °F | -9 to +46 °C | |
| Temperature Effect on Output (Maximum) | ±0.0008 %Reading/°F | ±0.0018 %Reading/°C | [7] |
| Temperature Effect on Zero Balance (Maximum) | ±0.0008 %FS/°F | ±0.0018 %FS/°C | [7] |
| Electrical | |||
| Bridge Resistance | 350 Ohm | 350 Ohm | [1] |
| Excitation Voltage (Recommended) | 10 VDC | 10 VDC | [8] |
| Insulation Resistance | >5k GOhm | >5k GOhm | |
| Zero Balance | ±1 %RO | ±1 %RO | [3] |
| Output Polarity | +Tension | +Tension | |
| Physical | |||
| Size - Height | 2.50 in | 63.5 mm | [9] |
| Size - Diameter | 4.12 in | 104.6 mm | [9] |
| Weight | 6.4 lb | 2.9 kg | |
| Mounting Thread | 5/8 - 18 UNF-3B | No Metric Equivalent | |
| Housing Material | Painted Steel | Painted Steel | |
| Sensing Element | Strain Gage | Strain Gage | |
| Mounting Torque | 200 lbf-in | 23 Nm | |
| Deflection at Full Scale Capacity | 0.001 in | 0.025 mm | |
| Electrical Connector | PT02E-10-6P | PT02E-10-6P | |
* All specifications are at room temperature unless otherwise specified.
Accessories
| Optional | ||
| 084A100 | Tension Load Base w/ 5/8-18 UNF-3B | 1 |
| 084A55 | Load cell thread pre-tensioner 5/8-18 | 1 |
| 084A90 | Connector Protector, 1200 & 1400 Series | 1 |
| 181-012A | Mating conn., 6-socket (F) w/strain relief for sensors with PT conn. | 1 |
| 8311-01-10A | Cable assembly for sensors with PT conn., 10-ft, PT conn. to pigtails, 4-cond. cable | 1 |
PCB-1403-15A
