Low noise, coaxial, 30 awg (7/38), green TFE cable for HALT & HASS testing, 20-ft, SS Hex 10-32 plug (QX) to BNC plug (AC)

Fastener Testing Plate Set, Standard Hardness, 1/2-in

Tabletop Dual Slide Assembly, Fastener Test System, for use with two torque-tension load cells

Intrinsic safe ICP® pressure sensor, 500 psi, 10 mV/psi, case isolated, 2-pin connector, temp to 250F

• Measurement Range: 500 psi (3447 kPa)
• Sensitivity: (±15%)10 mV/psi (1.45 mV/kPa)
• Low Frequency Response: (-5%)0.5 Hz
• Resonant Frequency: >=60 kHz (>=60 kHz)
• Electrical Connector: 2-Pin MIL-C-5015
• Weight: 2.7 oz (75.6 gm)

PCB L&T fatigue rated load cell low profile, 5 klbf rated capacity 300% overload protection 2.0mv/v output 5/8-18 UNF-2B thread PT02E-10-6P connector

• Measurement Range: 5000 lb (22 kN)
• Size - Diameter: 4.12 in (104.6 mm)
• Size - Height: 2.50 in (63.5 mm)
• Electrical Connector: PT02E-10-6P

Load Cell, Side Force, 100 Lb FS, Integral Cable with pigtails, Stainless Steel Construction, GSE/RS standard wiring code

• Measurement Range: 100 lbf (445 N)
• Size - Diameter: 1.50 in (38.1 mm)
• Size - Height: 1.25 in (31.75 mm)

Link quartz force sensor, 12k lb comp., 4k lb tension, 18 pC/lb

Triaxial MEMS Shock accelerometer, 20kG, thru hole mount, integral 10-ft silicone cable terminating in pigtails

• Sensitivity: (±50%)0.010 mV/g (0.001 mV/(m/s²))
• Measurement Range: ±20000 g (±196100 m/s² pk)
• Frequency Range: (1dB)0 to 10000 Hz
• Sensing Geometry: Full Active
• Mounting: Through Holes (2)
• Weight: 0.1 oz (2.83 gm)

Miniature, Lightweight (0.2 gm), Ceramic Shear ICP® Accel., 10 mV/g, 2 to 10k Hz, No Extension Cable

• Sensitivity: (±20%)10 mV/g (1.02 mV/(m/s²))
• Measurement Range: ±500 g pk (±4905 m/s² pk)
• Broadband Resolution: 0.003 g rms (0.03 m/s² rms)
• Frequency Range: (±5%)2.0 to 10000 Hz
• Sensing Element: Ceramic
• Weight: 0.007 oz (0.2 gm)

Triaxial MEMS DC accelerometer, 675 mV/g, 2 g, 9-pin socket, special static and dynamic calibration supplied for each axis

• Sensitivity: (±3%)675 mV/g (68.8 mV/(m/s²))
• Measurement Range: ±2 g pk (±19.6 m/s² pk)
• Electrical Connector: 9-Pin (9-Pin)
• Weight: 0.6 oz (17.3 gm)

Patented phantom powered 48V, 24V or 12V, 377B02 microphone and 426A14 preamplifier system

• Nominal Microphone Diameter: 1/2"
• Frequency Response Characteristic: Free-Field
• Frequency Range: (±2dB)3.75 to 20000 Hz (3.75 to 20000 Hz)
• Inherent Noise: 15.5 dB(A) re 20 µPa
• Dynamic Range: 137 dB re 20 µPa

MEMS Shock Accelerometer, 60 Kg, thru hole mount, 096 integral cable

• Sensitivity: (±50%)0.003 mV/g (0.0003 mV/(m/s²))
• Measurement Range: ±0 to 60000 g (±0 to 588400 m/s² pk)
• Frequency Range: (1dB)0 to 20000 Hz
• Sensing Geometry: Full Active
• Mounting: Through Holes (2)
• Weight: 0.045 oz (1.28 gm)