Cable assembly for Series 4100 w/ Series 8120, 10-ft, MS conn. to card edge conn., 6-cond. cable

Thermal boot (for Series 209)

Cable, RS Instrument to 4-pin Transducers

Fastener Test Plate Set, Standard Hardness, M8 fasteners

Intrinsic safe ICP® pressure sensor, 50 psi, 100 mV/psi, ground isolated, 10-32 connector, temp to 250F

• Measurement Range: 50 psi (344.8 kPa)
• Sensitivity: (±15%)100 mV/psi (14.503 mV/kPa)
• Low Frequency Response: (-5%)0.5 Hz
• Resonant Frequency: >=250 kHz (>=250 kHz)
• Electrical Connector: 10-32 Coaxial Jack
• Weight: 0.6 oz (17.0 gm)

PCB L&T load cell, low profile, 5000 lbf rated capacity, 50% overload protection, 4.0mV/V output 5/8-18 UNF-2B thread, PTO2E-10-6P connector, with mounting base.

Rod End Load Cell, 20k lbf (89 kN) rated capacity, 50% static overload protection, 1-14 male & female thread, steel construction

• Measurement Range: 20 klbf (89 kN)
• Size - Diameter: 1.50 in (38.1 mm)
• Size - Height: 4.50 in (114.3 mm)
• Electrical Connector: PT02E-10-6P

PCB L&T S-Type Load Cell, 1k lbf rated capacity, 150% of RO static overload protection, 2mV/V output, 1/2-20 UNF threads, integral 10 ft cable w/ open end, aluminum construction

• Measurement Range: 1000 lb (4448 N)
• Size - Height: 3.0 in (76.2 mm)
• Electrical Connector: 10 ft - Integrated Cable

Force ring, 100k lb comp., 17 pC/lb, charge output

• Sensitivity: (±15%)17 pC/lb (3822 pC/kN)
• Upper Frequency Limit: 35000 Hz
• Temperature Range: -100 to +400 °F (-73 to +204 °C)
• Weight: 12.5 oz (354 gm)

MEMS shock accelerometer, 20 kg, 1/4-28 stud mount, 096 integral cable (side exit), length 10-ft pigtails

• Sensitivity: (±50%)0.010 mV/g (0.001 mV/(m/s²))
• Measurement Range: ±20000 g (±196100 m/s² pk)
• Frequency Range: (1dB)0 to 10000 Hz
• Sensing Geometry: Full Active
• Mounting: Integral Stud
• Weight: 0.088 oz (2.5 gm)

ICP® Triaxial shock accelerometer, 0.1 mV/g, 50k g range, mechanically isolated and electrically filtered, 5-ft integral cable, no mating cable supplied

• Sensitivity: (±30%).1 mV/g (.01 mV/(m/s²))
• Measurement Range: ±50000 g pk (±440000 m/s² pk)
• Frequency Range: (±1dB)4 to 10000 Hz

MEMS DC ACCEL, 3711F122G/006DZ

• Sensitivity: (±3%)675 mV/g (68.8 mV/(m/s²))
• Measurement Range: ±2 g pk (±19.6 m/s² pk)
• Broadband Resolution: 0.1 mg rms (0.001 m/s² rms)
• Temperature Range: -65 to +250 °F (-54.0 to +121 °C)
• Frequency Range: (±5%)0 to 250 Hz
• Electrical Connector: Integral Cable (Integral Cable)