PCB-480M122
1-channel, battery-powered, ICP® sensor signal cond., gain x1, x10, x100, BNC input/output conn., 4 mA
- Channels: 1
Specification Notes
[1] Low frequency response specified into 1M ohm load.
[2] After Serial Number 24699, previously HFR was 100kHz.
[3] Provided by optional external DC power supply.
[4] With 1M ohm load.
[5] Excitation voltage to sensor limited by optional DC power voltage.
[6] Through internal current limiting regulator.
[7] Un-buffered output, read out device input impedance affects discharge time constant and low frequency response of unit.
[8] See PCB Declaration of Conformance PS024 for details.
| English: | SI: | ||
|---|---|---|---|
| Performance | |||
| Channels | 1 | 1 | |
| Frequency Range (-5 %) (x1, x10 Gain) | 0.15 to 100000 Hz | 0.15 to 100000 Hz | [1] |
| Frequency Range (-10 %) (x100 Gain) | 0.15 to 50000 Hz | 0.15 to 50000 Hz | [2] |
| Voltage Gain (±2 %) | 1:1 | 1:1 | |
| Voltage Gain (±2 %) | 1:10 | 1:10 | |
| Voltage Gain (±2 %) | 1:100 | 1:100 | |
| Fault/Bias Monitor/Meter (±1 V) (midscale) | 13 VDC | 13 VDC | |
| Environmental | |||
| Temperature Range | 32 to 120 °F | 0 to 50 °C | |
| Electrical | |||
| Excitation Voltage (To Sensor) | 25 to 29 VDC | 25 to 29 VDC | [5] |
| Constant Current Excitation (To Sensor) | 3.4 to 4.6 mA | 3.4 to 4.6 mA | [6] |
| Discharge Time Constant | >7 sec | >7 sec | [4] [7] |
| DC Offset (Maximum) | <30 mV | <30 mV | [4] |
| Spectral Noise (1 Hz) (Gain 1) | .25 µV/√Hz | -132 dB | |
| Spectral Noise (10 Hz) (Gain 1) | .07 µV/√Hz | -143 dB | |
| Spectral Noise (100 Hz) (Gain 1) | .05 µV/√Hz | -146 dB | |
| Spectral Noise (1000 Hz) (Gain 1) | .04 µV/√Hz | -148 dB | |
| Spectral Noise (10000 Hz) (Gain 1) | .03 µV/√Hz | -150 dB | |
| Broadband Electrical Noise (1 to 10000 Hz) (Gain x1) | 3.25 µV rms | -110 dB/rms | |
| Spectral Noise (1 Hz) (Gain 10) | 2.2 µV/√Hz | -113 dB | |
| Spectral Noise (10 Hz) (Gain 10) | 2.0 µV/√Hz | -114 dB | |
| Spectral Noise (100 Hz) (Gain 10) | 1.1 µV/√Hz | -119 dB | |
| Spectral Noise (1000 Hz) (Gain 10) | .55 µV/√Hz | -125 dB | |
| Spectral Noise (10000 Hz) (Gain 10) | .3 µV/√Hz | -130 dB | |
| Broadband Electrical Noise (1 to 10000 Hz) (Gain x10) | 49 µV/rms | -86 dB/rms | |
| Spectral Noise (1 Hz) (Gain 100) | 20 µV/√Hz | -94 dB | |
| Spectral Noise (10 Hz) (Gain 100) | 19 µV/√Hz | -94 dB | |
| Spectral Noise (100 Hz) (Gain 100) | 12 µV/√Hz | -98 dB | |
| Spectral Noise (1000 Hz) (Gain 100) | 5.5 µV/√Hz | -105 dB | |
| Spectral Noise (10000 Hz) (Gain 100) | 2 µV/√Hz | -114 dB | |
| Broadband Electrical Noise (1 to 10000 Hz) (Gain x100) | 569 µV/rms | -65 dB/rms | |
| Power Required (Standard) | Internal Battery | Internal Battery | |
| Internal Battery (Type) | 9V | 9V | |
| Battery Life (Standard Alkaline) | 50 hours | 50 hours | |
| Power Required (Alternate) | DC Power | DC Power | |
| DC Power | 15 mA | 15 mA | [3] |
| Internal Battery (Quantity) | 3 | 3 | |
| DC Power | 18 to 30 VDC | 18 to 30 VDC | [3] [5] |
| Physical | |||
| Electrical Connector (Input, sensor) | BNC Jack | BNC Jack | |
| Electrical Connector (Output, scope) | BNC Jack | BNC Jack | |
| Electrical Connector (External Power, DC) | 3.5 mm Diameter Miniature Jack | 3.5 mm Diameter Miniature Jack | |
| Electrical Connector (Battery Charger) | #722 Switchcraft Jack | #722 Switchcraft Jack | |
| Size - Depth | 2.4 in | 6.1 cm | |
| Size - Height | 4.0 in | 10 cm | |
| Size - Width | 2.9 in | 7.4 cm | |
| Weight (Including Batteries) | 0.7 lb | 0.3 kg | |
* All specifications are at room temperature unless otherwise specified.
PCB-480M122
