Fastener Testing Plate Set, Standard Hardness, 5/8-in.

PCB L&T Canister load cell, 100 lbf (445 N) rated capacity, 50% static overload protection, 2mV/V output, 1/4-28 UNF-2B threads, PT02E-10-6P connector, aluminum construction

• Measurement Range: 100 lb (445 N)
• Size - Diameter: 2.75 in (69.9 mm)
• Size - Height: 1.5 in (38.1 mm)
• Electrical Connector: PT02E-10-6P

Tourmaline ICP® pressure bar with 003 cable and inline source follower, 10k psi, 0.5 mV/psi, 0.2 microsecond rise time

• Measurement Range: 10000 psi (68950 kPa)
• Sensitivity: (±20%)0.5 mV/psi (0.073 mV/kPa)
• Low Frequency Response: (-5%)0.5 Hz
• Resonant Frequency: >=1500 kHz
• Electrical Connector: 10-32 Coaxial Jack
• Weight: 1.4 oz (39 gm)

PCB L&T fatigue rated low cell low profile, 12.5 klbf rated capacity, 300% overload protection, 2.0 mv/v output, 1 1/4-12 UNF-2B thread PT02E-10-6P connector with mounting base.

Multi-purpose ICP® force sensor, 10 lb comp., 10 lb tension, 500 mV/lb, axial conn.

• Measurement Range: 10 lb (0.04448 kN)
• Sensitivity: (±15%)500 mV/lb (112404 mV/kN)
• Low Frequency Response: (-5%)0.01 Hz
• Upper Frequency Limit: 36000 Hz
• Temperature Range: -65 to +250 °F (-54 to +121 °C)

Triax force sensor, reversed shear polarity, 1k lb (Fz), 500 lb (Fx,y), 15 pC/lb (z), 32 pC/lb (x, y)

• Temperature Range: -100 to +350 °F (-73 to +177 °C)
• Electrical Connector: 10-32 Coaxial Jack

Triaxial, Thru-hole mtg, Ceramic shear ICP® accel, 10 mV/g, 0.4 to 10 kHz, Case isolated, TEDS Ver 1.0, 4-pin connector, incl. both 6-32 & M3 fasteners

• Sensitivity: (±5%)10.0 mV/g (1.02 mV/(m/s²))
• Measurement Range: ±500 g pk (±4905 m/s² pk)
• Electrical Connector: 1/4-28 4-Pin (1/4-28 4-Pin)

Triaxial MEMS DC accelerometer, 14 mV/g, 100 g, 10 ft integral cable

• Sensitivity: (±3%)13.5 mV/g (1.38 mV/(m/s²))
• Measurement Range: ±100 g pk (±981 m/s² pk)
• Electrical Connector: Integral Cable (Integral Cable)
• Weight: 4.2 oz (119 gm)

377C01 microphone with short 426A07 preamplifier, TEDS

• Nominal Microphone Diameter: 1/4"
• Frequency Response Characteristic: Free-Field
• Frequency Range: (+2 / -3dB)4 to 100000 Hz
• Dynamic Range: 165 dB re 20 µPa

PCB L&T Torque Sensor, Rotary Transformer, Shaft to Shaft, 1k in-lb Capacity FS, 15k RPM Max., MS Conn.

• Measurement Range: 1000 in-lb (113 Nm)
• Sensitivity: 2.5 mV/V (2.5 mV/V)
• Non-Linearity: <=0.05 % FS
• Mounting: 1.00 in Dia. Keyed Shaft (25.4 mm Dia. Keyed Shaft)
• Maximum Speed: 15000 RPM

1-channel, battery-powered, ICP® sensor signal cond., gain x1, x10, x100, BNC input/output conn., 4 mA

• Channels: 1

PCB L&T TORKDISC® System, 16-bit telemetry system, 100k in-lb/8,333 ft-lb(11.3 kN-m) rated capacity, 100% static overload protection, 10,000 RPM Max., steel alloy

• Measurement Range: 100000 in-lb (11298 Nm)
• Temperature Range: +32 to +185 °F (0 to +85 °C)
• Torsional Stiffness: 230000 kin-lb/radian (25987 kN-m/radian)
• Overload Limit: 110000 in-lb (12430 Nm)
• Housing Material: Plated Steel
• Weight: 30 lb (13.6 kg)