PCB-350B41/NC
    zoom_out_map

      PCB-350B41/NC

      ICP® Triaxial shock accelerometer, 0.05 mV/g, 100k g range, mech. isolated and electrically filtered, 5-ft int cable, no mating cable supplied

      • Sensitivity: (±30%)0.05 mV/g (0.005 mV/(m/s²))
      • Measurement Range: ±100000 g pk (±981000 m/s² pk)
      • Frequency Range: (±1dB)4 to 10000 Hz

      Specification Notes


      [1] Typical.
      [2] Electrical filter is a second order filter.
      [3] Amplitude at resonance is +9 dB.
      [1] Typical.
      [4] Test performed on a shaker at 100Hz
      [1] Typical.
      [5] See PCB Declaration of Conformance PS023 for details.

      English:SI:
      Performance
      Sensitivity (±30 %)0.05 mV/g0.005 mV/(m/s²)
      Measurement Range±100000 g pk±981000 m/s² pk
      Frequency Range (±1 dB)4 to 10000 Hz4 to 10000 Hz
      Resonant Frequency>50 kHz>50 kHz
      Electrical Filter Corner Frequency (3)17 kHz17 kHz [1] [2]
      Mechanical Filter Resonant Frequency35 kHz35 kHz [1] [3]
      Broadband Resolution (1)0.5 g rms4.9 m/s² rms [1]
      Non-Linearity (per 10,000 g (98,100 m/s²))2.5 %2.5 %
      Transverse Sensitivity≤7 %≤7 %
      Environmental
      Overload Limit (Shock)±150000 g pk±1471500 m/s² pk
      Temperature Range (Operating)-10 to +150 °F-23 to +66 °C
      Temperature Range (Storage)-40 to +200 °F-40 to +93 °C
      Temperature ResponseSee Graph %/°FSee Graph %/°F [1] [4]
      Base Strain Sensitivity0.002 g/µε0.02 (m/s²)/µε [1]
      Electrical
      Excitation Voltage20 to 30 VDC20 to 30 VDC
      Constant Current Excitation2 to 20 mA2 to 20 mA
      Output Impedance≤200 Ohm≤200 Ohm
      Output Bias Voltage8 to 14 VDC8 to 14 VDC
      Discharge Time Constant0.1 sec0.1 sec [1]
      Settling Time (within 10% of bias)<1 sec<1 sec
      Electrical Isolation (Case)>100000000 Ohm>100000000 Ohm
      Physical
      Sensing ElementCeramicCeramic
      Sensing GeometryShearShear
      Housing MaterialTitaniumTitanium
      SealingHermeticHermetic
      Size - Height1.02 in26.0 mm
      Size - Length1.02 in26.0 mm
      Size - Width1.02 in26.0 mm
      Weight (without cable)0.95 oz27 g [1]
      Electrical Connection PositionSideSide
      Cable Termination1/4-28 4-Pin Jack1/4-28 4-Pin Jack
      Cable Length5.0 ft1.52 m
      Cable Type034 4-cond Shielded034 4-cond Shielded
      MountingThrough HoleThrough Hole

      * All specifications are at room temperature unless otherwise specified.

      TempChart

      Accessories


      Supplied
      034G054-conductor, low noise, shielded FEP cable, 5-ft, 4-socket plug to (3) BNC plugs (labeled X Y Z)1
      100-16040-401
      100-6774-101
      100-8994-401
      ACS-14T1
      ACS-22TTriaxial amplitude response calibration for shock accelerometer, 100 Hz to upper 1 dB frequency (max 15 kHz)1
      PCB-350B41/NC

      Specific References

      Download

      350b41_nc_nr_specs.pdf

      PCB-350B41/NC_specs

      Download (30.62k)

      350b41_nc_nr_manual.pdf

      PCB-350B41/NC_manual

      Download (30.62k)

      350b41_nc_drawings.pdf

      PCB-350B41/NC_drawings

      Download (2.26M)