PCB L&T S-Type Load Cell, 2,000 lbf rated capacity, 150% of RO static overload protection, 2mV/V output, 1/2-20 UNF threads, integral 10 ft cable w/ open end, nickel-plated steel

• Measurement Range: 2000 lb (8896 N)
• Size - Height: 3.0 in (76.2 mm)
• Electrical Connector: 10 ft - Integrated Cable

Multi-purpose charge force sensor, 5k lb comp., 500 lb tension, 18 pC/lb, axial conn.

• Sensitivity: (±15%)18 pC/lb (4046 pC/kN)
• Upper Frequency Limit: 36000 Hz
• Temperature Range: -300 to +400 °F (-184 to 204 °C)
• Mounting Thread: M7 x 0.75 - 6g
• Weight: 0.71 oz (20 gm)

MEMS ACCELEROMETER, 3501B1220KG/M010LN

• Sensitivity: (±50%)0.010 mV/g (0.001 mV/(m/s²))
• Measurement Range: ±20000 g (±196100 m/s² pk)
• Frequency Range: (1dB)0 to 10000 Hz
• Sensing Geometry: Full Active
• Mounting: Integral Stud
• Weight: 0.088 oz (2.5 gm)

ICP® Triaxial shock accelerometer, 0.5 mV/g, 10k g range, mechanically isolated and electrically filtered, 5-ft integral cable, no mating cable supplied

• Sensitivity: (±30%)0.5 mV/g (0.05 mV/(m/s²))
• Measurement Range: ±10000 g pk (±98000 m/s² pk)
• Frequency Range: (±1dB)0.4 to 10000 Hz
• Electrical Connector: Integral Cable (Integral Cable)

MEMS DC ACCEL, 3711F122G/050DZ

• Sensitivity: (±3%)675 mV/g (68.8 mV/(m/s²))
• Measurement Range: ±2 g pk (±19.6 m/s² pk)
• Broadband Resolution: 0.1 mg rms (0.001 m/s² rms)
• Temperature Range: -65 to +250 °F (-54.0 to +121 °C)
• Frequency Range: (±5%)0 to 250 Hz
• Electrical Connector: Integral Cable (Integral Cable)

MEMS DC ACCEL, 3741F1230G/030JJ

• Sensitivity: (±3%)90 mV/g (9.17 mV/(m/s²))
• Measurement Range: ±30 g pk (±294.2 m/s² pk)
• Broadband Resolution: 0.85 mg rms (0.0083 m/s² rms)
• Temperature Range: -65 to 250 °F (-54.0 to 121 °C)
• Frequency Range: (±5%)0 to 1500 Hz
• Electrical Connector: Integral Cable

Rugged Microphone Kit, 378B02 Microphone & Preamplifier, 079A52 Rugged Grid Cap & 079A59 Calibration Adaptor

• Nominal Microphone Diameter: 1/2"
• Frequency Response Characteristic: Free-Field
• Frequency Range: (±2dB)3.75 to 20000 Hz
• Inherent Noise: 15.5 dB(A) re 20 µPa
• Dynamic Range: 137 dB re 20 µPa

Low pass plug-in filter, 100 Hz (-3dB point)

TORKDISC®, ROTARY TORQUE SENSOR, 16-BIT

• Measurement Range: 5000 in-lb (565 Nm)
• Temperature Range: +32 to +185 °F (0 to +85 °C)
• Torsional Stiffness: 14500000 in-lb/radian (1600 kN-m/radian)
• Overload Limit: 10000 in-lb (1130 Nm)
• Housing Material: Steel Alloy
• Weight: 9.0 lb (4.1 kg)

Cable assembly for sensors with PT conn., 5-ft, PT conn. to pigtails, 4-cond. cable

Pilot bushing for Models 202B & 212B

Strain Gage Amplifier Card, 0-5 VDC Output, 12 VDC Power supply required.