Showing 325-336 of 2043 item(s)
Sort by:
Best sellers Relevance Name, A to Z Name, Z to A
Showing 325-336 of 2043 item(s)

Active filters

PCB-208A12
0

PCB-208A12

Multi-purpose ICP® force sensor, 100 lb comp., 100 lb tension, 50 mV/lb, axial conn.

  • Measurement Range: 100 lb (0.4448 kN)
  • Sensitivity: (±15%)50 mV/lb (11240 mV/kN)
  • Low Frequency Response: (-5%)0.001 Hz
  • Upper Frequency Limit: 36000 Hz
  • Temperature Range: -65 to +250 °F (-54 to +121 °C)
    PCB-3503A1160KG
    0

    PCB-3503A1160KG

    Triaxial MEMS Shock accelerometer, 60kG, thru hole mount, integral 10-ft silicone cable terminating in pigtails

    • Sensitivity: (±50%)0.003 mV/g (0.0003 mV/(m/s²))
    • Measurement Range: ±60000 g (±588400 m/s² pk)
    • Frequency Range: (1dB)0 to 10000
    • Sensing Geometry: Full Active
    • Mounting: Through Holes (2)
    • Weight: 0.1 oz (2.83 gm)
      PCB-354B05
      0

      PCB-354B05

      Triaxial, Thru-hole mtg, Ceramic shear ICP® accel, 100 mV/g, 0.4 to 10k Hz, Case isolated, TEDS Ver 1.0, 4-pin connector, incl. both 6-32 & M3 fasteners

      354B05 improves upon the 354A05 with extended frequency response to 10 kHz at 5%, 
      • Sensitivity: (±5%)100 mV/g (10.2 mV/(m/s²))
      • Measurement Range: ±50 g pk (±491 m/s² pk)
      • Electrical Connector: 1/4-28 4-Pin (1/4-28 4-Pin)
        PCB-3713F12200G
        0

        PCB-3713F12200G

        Triaxial MEMS DC accelerometer, 7 mV/g, 200 g, 10 ft integral cable

        • Sensitivity: (±3%)6.75 mV/g (0.69 mV/(m/s²))
        • Measurement Range: ±200 g pk (±1962.0 m/s² pk)
        • Electrical Connector: Integral Cable (Integral Cable)
        • Weight: 4.2 oz (119 gm)
          PCB-376C10
          0

          PCB-376C10

          377C10, 0.25 inch microphone with a 426A07 short preamplifier, and system calibration with TEDS

          • Nominal Microphone Diameter: 1/4"
          • Frequency Response Characteristic: Pressure
          • Frequency Range: (±2dB)5 to 70000 Hz (5 to 70000 Hz)
          • Dynamic Range: 173 dB re 20 µPa
            PCB-482B11
            0

            PCB-482B11

            1-channel, line-powered, ICP® sensor signal cond., gain x1, x10, x100, BNC input/output conn.

            • Channels: 1
            • Voltage Gain: (±1%)x1 x10 x100
              0

              PCB-8311-18-20A

              Cable assembly for sensors with PT conn. and Series 8159, 20-ft, PT conn. to 9-pin(M) D-sub conn., 8-cond. cable

                  Back to top