PCB-(M)639A91
- Triaxial industrial ICP® vibration sensor,
- With drill through,
- Measurement range 50 g,
- Sensitivity 100 mV/g,
- Frequency range 0.5... 10,000 Hz,
- Frequency response calibration,
- M12 connector on the side
Industrial Vibration Sensors
.
Sort by:
PCB-EX357E93
- With ATEX / IECEx / CSA approval
- Vibration sensor with charge output
- Measuring axis perpendicular to the mounting screw
- Continuous operating temperature up to 649 ° C
- With through hole
- Measuring range 1,000 g
- Sensitivity 2.3 pC / g
- Upper limit frequency 3 kHz
- Integrated hardline connection cable, length 3 meters,
ending on 10-32 socket - New: slim 10-32 socket (diameter 6.35 mm)
PCB-EX611A20
- Vibration sensor with charge output,
- With ATEX approval,
- Continuous use temperature up to 650 ° C,
- With through-holes
- Measuring range 200 g,
- Sensitivity 10 pC/g,.
- Upper frequency limit 3,700 Hz,
- Integrated hardline cable, length 3 m,
ending on LEMO connectors
PCB-682A01
- Universal AC or DC power supply
- Three separate connection terminals for the output signal
- LED power indicator
PCB-EX615A42
- Vibration sensor with charge output,
- With ATEX approval,
- Continuous use temperature up to 260 ° C,
- With through-holes
- Measuring range 200 g,
- Sensitivity 100 pC/g,
- Upper frequency limit 6,000 Hz,
- Integrated armored PTFE - cable, length 3 m,
ending on tinned ends
PCB-682A14
- Transmitter for mounting on a top hat rail
- Connection of an industrial ICP® vibration sensor
- Integrated sensor supply
PCB-EX619A11
- Vibration sensor with charge output,
- With ATEX/CSA approval,
- Continuous use temperature up to 482 ° C,
- With through-holes
- Measuring range 500 g,
- Sensitivity 50 pC/g,
- Upper cutoff frequency 5,000 Hz,
- Integrated hardline cable, length 3 m,
ending on 2-pin connector
PCB-682A15
- Transmitter for mounting on a top hat rail
- Connection of an industrial ICP® vibration sensor
- Integrated sensor supply
PCB-(M)603M113
- Industrial piezoelectric vibration sensor
in 3-wire technology - No ICP® sensor power required
- Measuring range 20 g
- Sensitivity 100 mV / g
- Frequency range 1.6 ... 10.000 Hz
- Supply voltage 3 ... 12V
- One-point calibration at 100 Hz
- 3-pin connector at the top
PCB-(M)607M83
- Industrial ICP® vibration sensor
in 3- wire technology - No ICP® sensor power required
- Measuring range 45 g
- Sensitivity 100 mV / g
- Frequency range 1.5 ... 10.000 Hz
- One-point calibration at 100 Hz
- Freely orientable integrated connection cable, length 3 meters,
ending on cut end
PCB-604B11
- Triaxial industrial ICP® vibration sensor,
- With through hole,
- Measuring range 50 g,
- Sensitivity 100 mV / g,
- Frequency range 0.5 ... 5,000 Hz,
- One-point calibration at 100 Hz,
- 4-pin bayonet connector on the side,
- Integrated, waterproof connection cable, 3 m
PCB-637A06
- Industrial ICP® vibration sensor,
- Quartz sensor element,
- Temperature range -196 ... +121 ° C,
- Measuring range 200 g,
- Sensitivity 25 mV / g,
- Frequency range 0.2 ... 1500 Hz,
- 2-pin connector at the top