PCB-682A14
- Transmitter for mounting on a top hat rail
- Connection of an industrial ICP® vibration sensor
- Integrated sensor supply
| Specifications | |||
|---|---|---|---|
| Basic data | English units | SI units | |
| Number of channels | 1 | ||
| Input signal (vibration) | ±100 mV/g | ±10,2 mV/(m/s²) | [4] |
| Output signal (vibration DC) | 4… 20 mA | [3] | |
| Output signal (vibration AC) | 100 mV/g | 10,2 mV/(m/s²) | [1] |
| Frequency range (-3 dB) (speed) | 210 … 600.000 cpm | 3.5 ... 10k Hz | [2] [5] [6] |
| Output range (speed DC) | 0 … 1,00 in/sec pk | 0 … 25,4 mm/s pk | [4] |
| Conditions of use | |||
| Temperature range (operation) | -13 ... 158 ° F | -25 ... 70 ° C | |
| Temperature range (storage) | -40 ... 257 ° F | -40… 125 ° C | |
| Humidity (non-condensing) | 0… 95% | ||
| Technical characteristics | |||
| care | DC voltage | ||
| tension | 23… 25 V DC | ||
| Current consumption (maximum) | 100 mA | ||
| Settling time | <2 min | ||
| Supply voltage (for sensor) | 19… 21 V DC | ||
| Constant current supply (for sensor) | 3… 5 mA | ||
| Output range (± 5.0%) (DC current output vibration) | 16 mA | ||
| Physical characteristics | |||
| Connection (input / output) | Removable connection terminals | ||
| Connection (output for vibration raw signal) | BNC socket | ||
| Housing material | polyamide | ||
| Size - height | 3.9 in | 99 mm | |
| Size - width | 0.9 in | 22.5 mm | |
| Size - depth | 4.5 in | 114.5 mm | |
| Mass (maximum) | 6,4 oz | 127 grams | |
| Connection wire cross-section | 24-14 AWG | ||
| Top hat rail | 1.38 in | 35 mm | |
| Status display (operation) | Green LED | ||
| Status display (error) | Red LED | ||
| Hints | |||
|---|---|---|---|
| [1] | Based on a sensor sensitivity of 100 mV / g | ||
| [2] | Attenuation: -40 dB / decade | ||
| [3] | The output signal fluctuates at frequencies below 5 Hz. | ||
| [4] | The scaled output signal (U, I) is based on an ICP® sensor signal with a sensitivity of ± 100 mV / G | ||
| [5] | Tolerance of the lower limit frequency: ± 0.5 Hz | ||
| [6] | Tolerance of the upper limit frequency: ± 1.0 kHz | ||
| [7] | Details: see PCB Declaration of Conformance PS124 | ||
PCB-682A14
