PCB-604B11
- Triaxial industrial ICP® vibration sensor,
- With through hole,
- Measuring range 50 g,
- Sensitivity 100 mV / g,
- Frequency range 0.5 ... 5,000 Hz,
- One-point calibration at 100 Hz,
- 4-pin bayonet connector on the side,
- Integrated, waterproof connection cable, 3 m
| specifications | |||
|---|---|---|---|
| basic data | English units | SI units | |
| Sensitivity (± 20%) | 100 mV/g | 10,2 mV/(m/s²) | [5] |
| measuring range | ±50 g | ±490 m/s² | |
| Frequency range (± 3 dB) | 30 … 300.000 cpm | 0,5 … 5.000 Hz | [4] |
| resonant frequency | 600 kcpm | 10.000 Hz | [1] |
| Broadband resolution | 350 µg | 3.434 µm/s² | [1] |
| linearity error | ±1 % | [2] | |
| Lateral acceleration sensitivity | ≤5 % | ||
| Operating conditions | |||
| Overload limit (shock) | 5,000g pk | 49.050 m/s²pk | |
| temperature range | -65 … 250 °F | -54 … 121 °C | |
| protection | IP68 | ||
| Technical characteristics | |||
| Settling time (on bias voltage ± 1%) | ≤2,0 s | ||
| discharging | ≥0,3 s | ||
| supply voltage | 18 … 28 VDC | ||
| Constant current supply | 2… 20 mA | ||
| output impedance | <150 Ω | ||
| Bias voltage | 8 … 12 VDC | ||
| Spectral noise (10 Hz) | 8 µg/√Hz | 78,5 (µm/s²)/√Hz | [1] |
| Spectral noise (100 Hz) | 5 µg/√Hz | 49,1 (µm/s²)/√Hz | [1] |
| Spectral noise (1,000 Hz) | 4 µg/√Hz | 39,2 (µm/s²)/√Hz | [1] |
| Electrical insulation (housing) | >100 MΩ | ||
| Physical properties | |||
| Size - diameter | 1,38 in | 35,1 mm | |
| Size - height | 1,00 in | 25,4 mm | |
| Mass | 4,4 oz | 124 grams | |
| attachment | Through Hole | ||
| mounting thread | 1/4"-28 | No equivalent | [3] |
| Montagedrehmoment | 2 … 5 ft-lb | 2,7 … 6,8 Nm | |
| sensor element | ceramics | ||
| Geometry of the sensor element | Scherprinzip | ||
| housing material | stainless steel | ||
| seal | Hermetically sealed | ||
| Electrical connection | 4-pin socket (MIL-C-26482) | ||
| port location | Laterally | ||
| Pin assignment (pin A) | X axis | ||
| Pin assignment (pin B) | Y-axis | ||
| Pin assignment (pin C) | Z-axis | ||
| Connection (Pin D) | Mass | ||
[6]
| Hints | |||
|---|---|---|---|
| [1] | typically, | ||
| [2] | Zero-based balancing line, determined by the least squares method | ||
| [3] | Assembly also possible with M6 screw | ||
| [4] | Upper limit frequency tolerance: ± 10% | ||
| [5] | Conversion factor 1 g = 9,81 m / s² | ||
| [6] | Details: siehe PCB Declaration of Conformance PS023 | ||
| included supply | ||
|---|---|---|
| 081A68 | Montageschraube 1/4"-28 x 0,9" | (1) |
| Available options | ||||
|---|---|---|---|---|
| (M) Metric montage | ||||
| included supply | ||||
| M081A68 | Metric mounting screw with M6 thread | (1) | ||
| (CS) With CSA approval | ||||
PCB-604B11
