PCB-682A15
zoom_out_map

PCB-682A15

  • Transmitter for mounting on a top hat rail
  • Connection of an industrial ICP® vibration sensor
  • Integrated sensor supply

Specifications
Basic dataEnglish unitsSI units 
Number of channels 1
Input signal (vibration) ±100 mV/g ±10,2 mV/(m/s²) [4]
Output signal (vibration DC) 4… 20 mA [3]
Output signal (vibration AC) 100 mV/g 10,2 mV/(m/s²) [1]
Frequency range (-3 dB) (speed) 210 … 600.000 cpm 3.5 ... 10k Hz [2] [5] [6]
Output range (speed DC) 0 … 1,00 in/sec rms 0 … 25,4 mm/s rms [4]
Conditions of use
Temperature range (operation) -13 ... 158 ° F -25 ... 70 ° C
Temperature range (storage) -40 ... 257 ° F -40… 125 ° C
Humidity (non-condensing) 0… 95%
Technical characteristics
care DC voltage
tension 23… 25 V DC
Current consumption (maximum) 100 mA
Settling time <2 min
Supply voltage (for sensor) 19… 21 V DC
Constant current supply (for sensor) 3… 5 mA
Output range (± 5.0%) (DC current output vibration) 16 mA
Physical characteristics
Connection (input / output) Removable connection terminals
Connection (output for vibration raw signal) BNC socket
Housing material polyamide
Size - height 3.9 in 99 mm
Size - width 0.9 in 22.5 mm
Size - depth 4.5 in 114.5 mm
Mass (maximum) 6,4 oz 127 grams
Connection wire cross-section 24-14 AWG
Top hat rail 1.38 in 35 mm
Status display (operation) Green LED
Status display (error) Red LED

Hints
[1] Based on a sensor sensitivity of 100 mV / g
[2] Attenuation: -40 dB / decade
[3] The output signal fluctuates at frequencies below 5 Hz.
[4] The scaled output signal (U, I) is based on an ICP® sensor signal with a sensitivity of ± 100 mV / G
[5] Tolerance of the lower limit frequency: ± 0.5 Hz
[6] Tolerance of the upper limit frequency: ± 1.0 kHz
[7] Details: see PCB Declaration of Conformance PS124
PCB-682A15

Specific References

Download

682A15_manual.pdf

682A15_manual.pdf

Download (1.04M)

682A15_specs.pdf

682A15_specs.pdf

Download (28.08k)