PCB-356A45
    zoom_out_map

      PCB-356A45

      • Triaxial ICP® miniature vibration sensor,
      • With TEDS 1.0,
      • Measurement range 50 g,
      • Sensitivity 100 mV/g,
      • Frequency range 0.4... 10,000 Hz,
      • Dimensions 4.2 grams,
      • 4-pin female connector on the side
       
      Specifications
      Basic dataEnglish unitsSI units 
      Sensitivity (±10 %)100mV/g10.2 mV/(m/s²) 
      Measuring range±50 g pk±490 m/s² pk 
      Frequency range (≤5 %)0.7... 7,000 Hz 
      Frequency range (±10 %)0.4... 10,000 Hz 
      Resonance frequency≥30.000 Hz 
      Wide band resolution (1... 10,000 Hz)0.0005 g rms0.005 m/s² rms[1]
      Linearity error≤1 %[2]
      Transverse acceleration sensitivity≤6 % 
      TEDS memory chips in accordance with
      IEEE P1451. 4
      Yes 
      Conditions of use
      Overload limit (shock)±5.000 g pk±49.050 m/s² pk 
      Temperature range (operation)-65... 185 ° F-54... 85 ° C 
      Strain sensitivity (footprint)0.001 g/µε0.01 (m/s²)/µε[1]
      Technical characteristics
      Supply voltage20... 30 V DC 
      Constant power supply2... 20 mA 
      Output impedance≤200Ω 
      Bias voltage8... 12 V DC 
      Discharge charge time constant0.8... 2.4 s 
      Settling time (on area within ±10% of the bias voltage) 
      Spectral noise (1 Hz)125 µg/√Hz1.226 (µm/s²)/√Hz[1]
      Spectral noise (10 Hz)40 µg/√Hz392 (µm/s²)/√Hz[1]
      Spectral noise (100 Hz)15 µg/√Hz147 (µm/s²)/√Hz[1]
      Spectral noise (1,000 Hz)4 µg/√Hz39,2 (µm/s²)/√Hz[1]
      Physical properties
      Sensor elementCeramic 
      Geometry of the sensor elementShear principle 
      Housing materialTitanium 
      SealingHermetisch close 
      Size - height0.40 in10.2 mm 
      Size - length0.40 in10.2 mm 
      Size - width0.40 in10.2 mm 
      Mass0.15 oz4.2 grams[1]
      Electrical connection1/4 "-28 4-pin 
      Connecting positionOn the side 
      FixingAdhesive mounting 
      Notes
      [1]Typically  
      [2]Zero-balance just, determined using the method of least squares  
      [3]Details: see PCB Declaration of conformance PS023  
      Included accessories
      080A109Mount wax(1)
      080A90Superglue(1)
      ACS-1TFrequency response for Triaxial accelerometer, traceable to NIST, 10 Hz up to the upper 5%-Frequenz(1)
      PCB-356A45

      Specific References

      Download

      356A45_drawing

      Technical drawing

      Download (47.99k)

      356A45_specs

      Technical data sheet

      Download (74.15k)

      356A45_manual

      Operating instructions

      Download (1.88M)