PCB-356A61
zoom_out_map

PCB-356A61

  • Triaxial ICP® miniature vibration sensor,
  • With built-in low-pass filter,.
  • Measuring range 500 g
  • Sensitivity 10 mV / g,.
  • Frequency range 2... 4,000 Hz,
  • Weight 4 grams.
  • Integrated cable, length 1.5 m,
    ending on 4-pin female connector.
  • Including extension cable, length 1.5 m,
    ending on three BNC plugs
Basic data
Sensitivity (± ≤5 %) 10 mV / g 1.02 mV/(m/s²)
Measuring range ±500 gPK ±4.905 m/s²PK
Frequency range (-5%) 2... 4,000 Hz
Resonance frequency ≥55.000 Hz
Edge steepness of the filter 6 dB/octave [1]
Electrical filter corner frequency 15,000 Hz [1]
Wide band resolution 0.008 g RMS 0.08 m/s² RMS [1]
Linearity error ≤1 % [2]
Transverse acceleration sensitivity ≤5 %
Conditions of use
Overload limit (shock) ±10.000 gPK ±9≥ 100 MΩs²PK
Temperature range (operation) -65... 325 ° F -54... 163 ° C
Technical properties
Supply voltage 18... 30 V DC
Constant power supply 2... 20 mA
Output impedance ≤200 Ω
Bias voltage 7... 11 V DC
Discharge charge time constant 0.3... 1,0 s
Settling time
(on bias voltage ±10 %)
?3, 0 s
Spectral noise (1 Hz) 445 µg/√Hz 4,365 (µm/s²)/√Hz [1]
Spectral noise (10 Hz) 135 µg/√Hz 1,325 (µm/s²)/√Hz [1]
Spectral noise (100 Hz) 90 µg/√Hz 883 (µm/s²)/√Hz [1]
Spectral noise (1,000 Hz) 80 µg/√Hz 785 (µm/s²)/√Hz [1]
Physical properties
Sensor element Ceramic
Geometry of the sensor element Shear principle
Housing material Titanium
Sealing Hermetically sealed welded
Size - height 0.4 in 10.2 mm
Size - length 0.4 in 10.2 mm
Size - width 0.4 in 10.2 mm
Weight (without cable) 0.14 oz 4.0 grams [1]
Electrical connection Integrated cable
Cable outlet On the side
Cable termination 1/4 "-28 4-pin connector
Cable length 5.0 ft 1.5 m
Cable type Type 034, 4-conductor shielded cable
Mounting Mounting bolts
Mounting thread 5-40 female
Installation torque 4... 5 in-lb 45... 56 NCM
Notes
[1] Typically
[2] Zero-balance just, determined using the method of least squares
[3] Details: see PCBs Declaration of conformance PS023
Included accessories
034 G 05 4-wire shielded cables, 1.5 meter, 4-pin connector to three BNC -1
080A Adhesive mounting -1
080A109 Mount wax -1
081A27 Mounting bolts, 5-40 on 5-40 -1
081A90 Mounting bolts, 10-32 on 5-40 -1
ACS-1T Frequency response for Triaxial accelerometer, traceable to NIST, 10 Hz up to the upper 5%-Frequenz -1
M081A27 Metric mounting bolts, 5-40 M3 x 0.50 -1
(W) waterproof cable connection
PCB-356A61

Specific References

Download

356A61_drawing.PDF

Technical drawing

Download (601.33k)

356A61_specs.PDF

Technical data sheet

Download (32.24k)

356A61_manual.PDF

Operating instructions

Download (2.29M)