PCB-J356A45
- Triaxial ICP® miniature vibration sensor
- Mass-insulated housing
- With TEDS 1.0
- Measurement range 50 g
- Sensitivity 100mV / g
- Frequency range 0.4... 10,000 Hz
- Dimensions 4.2 grams
- 4-pin female connector on the side
| Specifications | |||
|---|---|---|---|
| Basic data | English units | SI units | |
| Sensitivity (±10 %) | 100mV/g | 10.2 mV/(m/s²) | |
| Measuring range | ±50 g pk | ±490 m/s² pk | |
| Frequency range (≤5 %) | 0.7... 7,000 Hz | ||
| Frequency range (±10 %) | 0.4... 10,000 Hz | ||
| Resonance frequency | ≥30.000 Hz | ||
| Wide band resolution (1... 10,000 Hz) | 0.0005 g rms | 0.005 m/s² rms | [1] |
| Linearity error | ≤1 % | [2] | |
| Transverse acceleration sensitivity | ≤6 % | ||
| TEDS memory chips in accordance with IEEE P1451. 4 |
Yes | ||
| Conditions of use | |||
| Overload limit (shock) | ±5.000 g pk | ±49.050 m/s² pk | |
| Temperature range (operation) | 65... 185 ° F | -54... 85 ° C | |
| Strain sensitivity (footprint) | 0.001 g/µε | 0.01 (m/s²)/µε | [1] |
| Technical characteristics | |||
| Power supply | 20... 30 V DC | ||
| Constant power supply | 2... 20 mA | ||
| Output impedance | ≤200Ω | ||
| Bias voltage | 8... 12 V DC | ||
| Discharge charge time constant | 0.8... 2.4 s | ||
| Settling time (on area within ±10% of the bias voltage) | |||
| Spectral noise (1 Hz) | 125 µg/√Hz | 1.226 (µm/s²)/√Hz | [1] |
| Spectral noise (10 Hz) | 40 µg/√Hz | 392 (µm/s²)/√Hz | [1] |
| Spectral noise (100 Hz) | 15 µg/√Hz | 147 (µm/s²)/√Hz | [1] |
| Spectral noise (1,000 Hz) | 4 µg/√Hz | 39,2 (µm/s²)/√Hz | [1] |
| Electrical insulation (base) | ≥100 MΩ | ||
| Physical properties | |||
| Sensor element | Ceramic | ||
| Geometry of the sensor element | Shear principle | ||
| Housing material | Titanium | ||
| Sealing | Hermetic | ||
| Size - height | 0.40 in | 10.2 mm | |
| Size - length | 0.40 in | 10.2 mm | |
| Size - width | 0.40 in | 10.2 mm | |
| Mass | 0.15 oz | 4.2 grams | [1] |
| Electrical connection | 1/4 "-28 4-pin | ||
| Connecting position | On the side | ||
| Fixing | Adhesive mounting | ||
| Notes | |||
|---|---|---|---|
| [1] | Typically | ||
| [2] | Zero-balance just, determined using the method of least squares | ||
| [3] | Details: See PCBs Declaration of conformance PS023 | ||
| Included accessories | ||
|---|---|---|
| 080A109 | Mount wax | (1) |
| 080A90 | Superglue | (1) |
| ACS-1T | Frequency response for Triaxial accelerometer, traceable to NIST, 10 Hz up to the upper 5% frequency | (1) |
PCB-J356A45
