PCB-356A05/NC
zoom_out_map

PCB-356A05/NC

  • Triaxial ICP®/IEPE miniatur vibration sensor
  • Operating temperature up to 163 ° C
  • Measuring range 20,000 g
  • Sensitivity 0.25 mV / g
  • Frequency range 1… 6,000 Hz
  • Integrated, highly flexible connection cable, length 1.5 meters,
  • ending on 4-pin connector
  • Without connection cable
specifications
basic dataEnglish unitsSI units 
Sensitivity (± 20%) 0.25 mV/g 0,025 mV/(m/s²)
measuring range ± 20,000 g pk ±196,200 m/s²pk
Frequency range (+/- 5%) 1.2 … 6.000 Hz
Frequency range (+/- 10%) 1 … 10.000 Hz
resonant frequency ≥50 kHz
Broadband resolution 0,04 gRMS 0,39 m/s²RMS [1]
Linearitätsfehler(10000 g, 98100 m/s²) ≤1 % [2]
Linearitätsfehler(20000g, 196,200 m/s²) ≤3 % [2]
Lateral acceleration sensitivity ≤5 %
Operating conditions
Overload limit (shock) ± 30,000 g pk ±294,300 m/s²pk
Temperature range (operation) -65 … to +325 °F -54… to +163 ° C
temperature range See graph [1]
Strain sensitivity (base area) ≤0.05 g / me ≤0.5 (m / s²) / me [1]
Technical characteristics
excitation voltage 18 … 30 VDC
Constant current supply 2 ... 20 mA
output impedance ≤100 Ω
Bias voltage 8 … 12 VDC
discharging 0,4 … 1,2 s
Settling time
(on bias voltage ± 10%)
<3 s
Spectral noise (1 Hz) 13.5 mg/√Hz 132 mm/s²/√Hz [1]
Spectral noise (10 Hz) 3.8 mg/√Hz 37.3 mm/s²/√Hz [1]
Spectral noise (100 Hz) 1.21 mg/√Hz 1.21 mm/s²/√Hz [1]
Spectral noise (1 kHz) 0.36 mg/√Hz 3.53 mm/s²/√Hz [1]
Spectral noise (10 kHz) 0.13 mg/√Hz 1.28 mm/s²/√Hz [1]
Physical properties
sensor element ceramics
Geometry of the sensor element Scherprinzip
housing material Titan
seal Hermetically
Size - height 0,25 in 6,35 mm
Size - length 0,25 in 6,35 mm
Size - width 0,25 in 6,35 mm
Mass (without cable) 0,03 oz 0.8 grams [1]
Electrical connection Integrated cable
connector Laterally
cable termination 1/4 28-Pin Jack
cable length 5 ft 1,5 m
cable type 019 4-way shielded
attachment adhesive mounting

17174_3.gifCEMark.gif[3]

Hints
[1] typically,
[2] Zero-based best-fit line, determined using the least squares method
[3] Details: siehe PCB Declaration of Conformance PS023

included supply
034G05 Shielded 4-wire cable, 1.5 meters, 4-pin connector to three BNC connectors (1)
080A109 mounting wax (1)
080A90 superglue (1)
ACS-1T Frequency response for triaxial transducers, traceable to NIST, 10 Hz up to the upper 5% frequency (1)
PCB-356A05/NC

Specific References

Download

356A05_specs

Download (70.01k)

356A05_drawing

Download (89.95k)

356A05_manual

Download (1.85M)