PCB-TLD352M131
- ICP®-Vibrationssensor,
- Measuring range ± 50 g pk,
- Sensitivity 100 mV / g,
- Frequency range 0.5 ... 10.000 Hz,
- 10-32 connector at the top,
- Ground isolated,
- High frequency calibration included
Uniaxial Vibration Sensors
.
Sort by:
PCB-3711F1250G
- MEMS accelerometer
- Suitable for measuring static accelerations
- Measuring range ± 50 g pk (± 490m / s²)
- Sensitivity (± 3%) 27 mV / g (2.8mV / (m / s²))
- Frequency range (± 5%) 0… 1,500 Hz
- Supply voltage 5… 32 V DC
- Integrated connection cable, length 3 meters,
ending on stripped and tinned ends
PCB-(M)320C53
- ICP® high-temperature vibration sensor,
- Continuous use temperature up to 163 ° C,
- Measuring range 5,000 g,
- Sensitivity 1 mV / g,
- Frequency range 1... 5,000 Hz,
- Mass 1.9 grams,
- 5-44 connector on the side
PCB-TLD355M102
- ICP®-Vibrationssensor,
- With through hole,
- Ionizer with ground insulation,
- Ground isolated,
- Measuring range 500 g,
- Sensitivity 10 mV / g,
- Frequency range 1 ... 7,000 Hz,
- 10-32 connector on the side
PCB-3741F1210G
- MEMS accelerometer
- Suitable for measuring static accelerations
- Measuring range ± 10 g pk (± 98.1m / s²)
- Sensitivity (± 3%) 270 mV / g (27.5mV / (m / s²))
- Frequency range (± 5%) 0 ... 1,000 Hz
- Supply voltage 5… 32 V DC
- Integrated connection cable, length 3 meters,
ending on stripped and tinned ends
PCB-350A43
- Triaxial ICP® shock acceleration sensor,
- Mass-insulated,
- With electric and mechanical filters,
(-3 dB at 25,000 Hz) - Measuring range 10,000 g,
- Sensitivity 0.5 mV / g,
- Frequency range 0.4... 10,000 Hz,
- Integrated cable, length 1.5 m,
ending on 4-pin female connector, - Including extension cable, length 1.5 m,
ending on three BNC plugs
PCB-EX357A94
- With ATEX / IECEx / CSA approval
- Vibration sensor with differential charge output
- Continuous operating temperature up to 649 ° C
- With through hole
- Measuring range 1,000 g
- Sensitivity 3.3 pC / g
- Upper limit frequency 3,000 Hz
- Integrated hardline connection cable, length 3 meters,
ending on 7 / 16-27 2-pin
PCB-3741F12200G
- MEMS accelerometer
- Suitable for measuring static accelerations
- Measuring range ± 200 g pk (± 1960m / s²)
- Sensitivity (± 3%) 13.5 mV / g (1.38 mV / (m / s²))
- Frequency range (± 5%) 0… 1,500 Hz
- Supply voltage 5… 32 V DC
- Integrated connection cable, length 3 meters,
ending on stripped and tinned ends
PCB-352A74
- ICP®-miniature vibration sensor,
- Mass 1.2 grams,
- Measurement range 50 g,
- Sensitivity 100 mV/g,
- Frequency range 1... 8,000 Hz,
- Integrated cable, length 3 m,
ending on 10-32 plug
PCB-EX357A95
- With ATEX / IECEx / CSA approval
- Vibration sensor with differential charge output
- Measuring axis perpendicular to the mounting screw
- Continuous operating temperature up to 649 ° C
- With through hole
- Measuring range 1,000 g
- Sensitivity 3.3 pC / g
- Upper limit frequency 3,000 Hz
- Integrated hardline connection cable, length 3 meters,
ending on 7 / 16-27 2-pin
PCB-357A100
- Vibration sensor with charge output,
- Continuous use temperature up to 482 ° C,
- With UHT-12™ sensor element,
(no popcorn noise), - Measuring range 200 g,
- Sensitivity 5 pC/g,
- Upper cutoff frequency 5,000 Hz,
- 2-pin female connector on the side
PCB-EX357E90
- With ATEX / IECEx / CSA approval
- Vibration sensor with charge output
- Continuous operating temperature up to 649 ° C
- With through hole
- Measuring range 1,000 g
- Sensitivity 5 pC / g
- Upper limit frequency 2,500 Hz
- Integrated hardline connection cable, length 3 meters,
ending on 10-32 socket - New: slim 10-32 socket (diameter 6.35 mm)