PCB-3711F1150G
zoom_out_map

PCB-3711F1150G

  • MEMS accelerometer
  • Suitable for measuring static accelerations
  • Measuring range ± 50 g pk (± 490m / s²)
  • Sensitivity (± 3%) 27 mV / g (2.8mV / (m / s²))
  • Typical frequency range (± 5%) 0… 1,500 Hz
  • Supply voltage 5… 32 V DC
  • 4-pin connection socket on the side
Specifications
Basic dataEnglish unitsSI units 
Sensitivity (± 5%) 27 mV/g 2,8 mV/(m/s²) [7]
Measuring range ±50 g pk ±490,5 m/s² pk
Frequency range (± 5%) 0 … 1.500 Hz [2]
Frequenz­bereich (±10%) 0 … 2.000 Hz [3]
Resonance frequency 6,5kHz [2]
Phase response <10 °
Broadband resolution (0.5 ... 100 Hz) 1,5 mg rms 0,015 m/s² rms [2]
Linearitätsfehler ≤1 % [1]
Lateral acceleration sensitivity ≤3 %
Conditions of use
Overload limit (shock) ±5.000 g pk ±49.050 m/s² pk
Temperature range (operation) -65 … 250 °F -54 … 121 °C
Temperature range (storage) -65 … 250 °F -54 … 121 °C
Temperature coefficient of sensitivity ±2,5 % [4]
Temperature coefficient of the zero point ±1,5 % FSO [4]
Stretch sensitivity (base area) 0.001 g / ml 0.01 (m / s²) / ε [2]
Magnetic sensitivity 40 µg/Gs 3,9 (m/s²)/T [2]
Technical characteristics
Supply voltage 5 … 32 VDC
Power consumption ≤5 mA
Output impedance ≤120 Ω
Voltage offset ±20 mVDC [5]
Spectral noise (1 ... 100 Hz) 250 µg/√Hz 2453 (µm / s²) / √Hz [2]
Electrical insulation (base) >100 MΩ
Physical characteristics
Housing material Titan
seal Hermetically sealed
Size - height 0,45 in 11,4 mm
Size - length 0,85 in 21,6 mm
Size - width 0,85 in 21,6 mm
Mass 0,58 oz 16.3 grams
Electrical connection 4-Pin
connection Laterally
Attachment Two through holes

Hints
[1] Zero-based best-fit line, determined using the least squares method
[2] Typically
[3] Guaranteed; evidenced by the calibration certificate supplied
[4] -54… 121 ° C, reference 24 ° C
[5] Offset with 3 meter cable length (type 010)
[6] Details: siehe PCB Declaration of Conformance PS027
[7] Measured at 100 Hz, 1 grms.

included supply
080A152 Fastening clip (1)
081A113 Mounting screw with 4-40 thread (2)
M081A113 Mounting screw with M2.5 thread (2)
ACS-172 Calibration of the amplitude and phase response from 5 Hz to the upper ± 5% frequency range (1)
PCB-3711F1150G

Specific References

Download

3711E1150G_drawing.PDF

Technical drawing

Download (200.7k)

3711E1150G_manual.PDF

Operating instructions

Download (393.65k)

3711E1150G_specs.PDF

Technical data sheet

Download (80.58k)