Portable vibration calibrator (model 9110D)

specifications
basic data	English units	SI units
Maximum Amplitude - Swing Mode	20 g pk	196 m/s²pk	[6]
Maximum amplitude - vibration velocity	15 in/secpk	380 mm/spk	[6]
Maximum Amplitude - Schwingweg	50 milspk-pk	1,27 mmpk-pk
Maximum sensor mass	800 grams		[1]
frequency range	300 … 600.000 cpm	5 … 10.000 Hz
uncertainties
Vibration acceleration (30 ... 2,000 Hz)	±3 %
Vibration acceleration (7 ... 10,000 Hz)	±1 dB
Vibration velocity (30 ... 500 Hz)	±3 %
Vibration path (30 ... 150 Hz)	±3 %
Amplitudenlinearität	<1%		[2][3]
Distortion factor	5 %		[4][7]
Representable units
vibration acceleration	gpk, gRMS, m/s²pk, m/s²RMS
vibration velocity	mm/spk, in/spk
Vibration	mmpk-pk, milspk-pk
frequency	Hz, CPM
Operating conditions
temperature range	32 … 122 °F	0 … 50 °C
Input / Output
Integrated ICP® supply	And
Input for sensor to be tested	ICP, voltage
Bias voltage test (for ICP® sensors)	And
Display of the sensitivity of the device under test in the integrated display	And
Input for external shaker stimulation	Ja (1 VAC rms)
Output of the reference sensor signal	Ja (10 mV / g)
power supply
Internal battery	12 VDC, 4 Ah
External supply	110 … 240 V, 50 … 60 Hz
Working time with rechargeable battery (100 grams mass, 100 Hz, 1 g pk )	18 hours		[5]
Working time with rechargeable battery (100 grams mass, 100 Hz, 10 g pk )	1 hour		[5]
Physical properties
Size - height	8,5 in	22 cm
Size - width	12 in	30,5 cm
Size - depth	10 in	28 cm
Mass	18 lb	8,2 kg
Sensor-Montagegewinde	1/4 "-28 female thread

Hints
[1]	Amplitude and frequency range limited at high sensor mass (see operating instructions)
[2]	100 grams of sensor mass, 100 Hz
[3]	Bus 10 g pk
[4]	Bus 5 g pk
[5]	Default setting ex factory
[6]	Idle (no sensor mounted)
[7]	100 grams of sensor mass, 30 ... 2,000 Hz