PCB-3711F1210G
    zoom_out_map

      PCB-3711F1210G

      • MEMS accelerometer
      • Suitable for measuring static accelerations
      • Measuring range ± 10 g pk (± 98.1m / s²)
      • Sensitivity (± 3%) 135 mV / g (13.8mV / (m / s²))
      • Frequency range (± 5%) 0 ... 1,000 Hz
      • Supply voltage 5… 32 V DC
      • Integrated connection cable, length 3 meters,
        ending on stripped and tinned ends
      Specifications
      Basic dataEnglish unitsSI units 
      Sensitivity (± 5%)135 mV/g13,8 mV/(m/s²)[6]
      Measuring range± 10 g pk±98,1 m/s²pk
      Frequency range (± 5%)0 … 1.000 Hz
      Frequency range (± 10%)0 … 1.500 Hz
      Resonance frequency3.200 Hz[2]
      Phase response (100 Hz)<10 °
      Broadband resolution0,35 mg rms0,0034 m/s²RMS[3]
      Linearitätsfehler≤1 %[2]
      Lateral acceleration sensitivity≤3 %
      Conditions of use
      Overload limit (shock)± 5,000 g pk±49.050 m/s²pk
      Temperature range (operation)-65 … 250 °F-54 … 121 °C
      Temperature range (storage)-65 … 250 °F-54 … 121 °C
      Temperature coefficient of sensitivity±2,5 %[1]
      Temperature coefficient of the zero point±1,5 % FSO[1]
      Stretch sensitivity (base area)0.001 g / ml0.01 (m / s²) / ε[3]
      Magnetic sensitivity40 µg/Gs3,9 (m/s²)/T[3]
      Technical characteristics
      Supply voltage5 … 32 VDC
      Power consumption≤5 mA
      Output impedance≤120 Ω
      Voltage offset±20 mVDC[4]
      Spectral Noise (1)50 µg/√Hz491 (µm / s²) / √Hz[3]
      Electrical insulation (housing)>100 MΩ
      Physical characteristics
      Housing materialTitan
      sealHermetically sealed
      Size - height0,45 in11,4 mm
      Size - length0,85 in21,6 mm
      Size - width0,85 in21,6 mm
      Ground (with cable)2,29 oz65.0 grams
      Electrical connectionIntegrated cable
      Cable outletLaterally
      Cable terminationTinned ends
      Cable typeType 010, shielded 4-wire cable
      Cable length10 ft3 m
      AttachmentThrough hole

      Hints
      [1]-54… 121 ° C, reference 24 ° C
      [2]Zero-based best-fit line, determined using the least squares method
      [3]Typically
      [4]Offset with 3 meter cable length (type 010)
      [5]Details: siehe PCB Declaration of Conformance PS027

      included supply
      080A152Fastening clip(1)
      081A113Mounting screw(2)
      ACS-172Calibration of the amplitude and phase response from 5 Hz to the upper ± 5% frequency range(1)
      M081A113Metric mounting screw(2)
      PCB-3711F1210G

      Specific References

      Download

      3711B1210G_drawing.PDF

      Technical drawing

      Download (192.04k)

      3711B1210G_manual.PDF

      Operating instructions

      Download (785.4k)

      3711B1210G_specs.PDF

      Technical data sheet

      Download (426.68k)