PCB-(M)601A11
| basic data | |||
| sensitivity (±20%) | 10.2 mV/(m/s²) | [6] | |
| measuring range | ±50 g | ±490 m / s² | |
| Frequency range (± 3 dB) | 16 … 600,000 cpm | 0.27 … 10,000 Hz | [5] |
| resonance frequency | 960 kcpm | 16,000 Hz | [1] |
| Wide band resolution | 50 µg | 491 µm / s ² | [1] |
| linearity | ≤1% | [3] | |
| Lateral acceleration sensitivity | ≤ 7% | ||
| Conditions of use | |||
| Overload limit (shock) | 5,000 g pk | 49,050 m/s² pk | |
| Temperature range | -65 … 250 ° F | -54 … 121 ° C | |
| protection class | IP68 | ||
| technical characteristics | |||
| Settling time (on bias voltage ± 1%) | ≤4.0 s | ||
| discharging charging time constant | ≥0.6 s | ||
| Power | 18 … 28 V DC | ||
| constant power supply | 2 … 20 mA | ||
| Output impedance | < 150 Ω | ||
| Bias voltage | 8 … 12 V DC | ||
| Spectral noise (10 Hz) | 3.2 µg / √Hz | 31,0 (µm / s ²) / √Hz | [1] |
| spectral noise (100 Hz) | 1.0 µg / √Hz | 9.81 (µm / s ²) / √Hz | [1] |
| Spectral noise (1,000 Hz) | 0.7 µg / √Hz | 6.94 (µm / s ²) / √Hz | [1] |
| electrical insulation (housing) | |||
| Physical properties | |||
| size - hex | 7/8 in | 22 mm | |
| size - height | 4.2 in | 107 mm | |
| Dimensions (without cable) | 2.8 oz | 80 g | |
| mounting thread | 1/4 "-28 threaded | no equivalent | "[4] |
| Assembly torque | 2 … 5 ft-lb | 2.7 … 6.8 Nm | |
| sensor element | ceramic | ||
| geometry of the Sensor element | shear principle | ||
| housing material | stainless steel | ||
| sealing | hermetically sealed welded | ||
| Electrical connection | potted integrated cable | ||
| cable outlet | top | ||
| Cable length | 10 ft | 3 m | |
| cable type | polyurethane | [2] | |
| notes | |||
| [1] | typically | ||
| [2] | Screened two-wire cable with twisted wire | ||
| [3] | zero-based balancing line, determined using the method of least squares | ||
| [4] | no equivalent in SI units | ||
| [5] | the upper cut-off frequency tolerance: ±10% | ||
| [6] | 1 g = 9.81 m/s² | ||
| [7] | details: see PCBs Declaration of conformance PS023 | ||
| equipment | |||
| 081A40 | Mounting bolts with 1/4 "-28 thread | -1 | |
| (M) metric mounting | |||
| equipment | |||
| M081A61 | metric" Mounting bolts with M6 thread | -1 | |
| (TO) temperature output | |||
| temperature range | 36 … 250 ° F | 2 … 121 ° C | |
| Ü Bert transmission factor | 5.56 mV / ° F (zero point at 32 °F) | 10 mV / ° C | |
| connections (red wire) | acceleration output | ||
| Terminal assigNment (black wire) | Mass | ||
| Pin assigNment (white wire) | temperature output | ||
| pin assigNment (green wire) | ground |
PCB-(M)601A11
