PCB-(M)603C02
zoom_out_map

PCB-(M)603C02

  • Industrial ICP® vibration sensor,
  • Measuring range 10 g,
  • Sensitivity500 mV / g,
  • Frequency range 0.5 … 3,000 Hz,
  • One-point calibration at 100 Hz,
  • 2-pin female connector above
  •  

    basic data
    sensitivity (±20%) 500 mV / g 51.0 mV/(m/s²) [5]
     
    measuring range ± 10 g ±98 m / s²  
     
    Frequency range (± 3 dB) 30 … 180,000 cpm 0.5 … 3,000 Hz [1]
     
    resonance frequency 1,500 kcpm 25,000 Hz [2]
     
    Wide band resolution 300 µg 2.943 µm / s ² [2]
     
    linearity ≤1%   [3]
     
    Transverse acceleration sensitivity ≤ 7%    
    conditions of use
    Overload limit (shock) 5,000 g pk 49,050 m/s² pk  
     
    temperature range -65 …200 °F -54 … 93 ° C  
     
    Type of protection IP68    
    Technical characteristics
    settling time (on bias voltage ± 1%) ≤5.0 s    
     
    discharging charging time constant ≥0.3 s    
     
    Power 18 … 28 V DC    
     
    constant power supply 2 … 20 mA    
     
    Output impedance < 500 Ω    
     
    Bias voltage 8 … 12 V DC    
     
    Spectral noise (10 Hz) 8 µg / √Hz 78.5 (µm / s ²) / √Hz [2]
     
    spectral noise (100 Hz) 3 µg / √Hz 29.4 (µm / s ²) / √Hz [2]
     
    spectral noise (1,000 Hz) 3 µg / √Hz 29.4 (µm / s ²) / √Hz [2]
     
    electric Insulation (housing) >100 MΩ    
    physical properties
    size - Allen 11/16 in 18 mm  
     
    size ße - height 1.65 in 42.2 mm  
     
    size 1.8 oz 51 grams  
     
    mounting thread 1/4 "-28 threaded no" metric equivalent [4]
     
    Assembly torque 2 … 5 ft-lb 2.7 … 6.8 Nm  
     
    sensor element ceramic    
     
    geometry the sensor element shear principle    
     
    housing material stainless steel    
     
    sealing hermetically sealed welded    
     
    Electrical connection 2-pin connector (MIL-C-5015)    
     
    connection position above    
    notes
    [1] the upper cut-off frequency tolerance: ±10%    
     
    [2] typically    
     
    [3] zero-based balancing line, determined using the method of least squares    
     
    [4] no equivalent in SI units    
     
    [5] Conversion factor 1 g = 9.81 m/s²    
     
    [6] details: see PCBs Declaration of conformance PS023 and PS060    
    Supplied accessoriesör
    081A40 mounting bolts with 1/4 "-28 thread -1  
     
    ICS-2 single point calibration at 100 Hz (traceable to NIST) -1  
    (M) metric mounting
    equipment      
     
    M081A61 metric mounting bolts with M6 thread -1  
    (TO) Temperature output
    temperature range 36 …200 °F 2 … 93 ° C  
     
    transcription factor 5.56 mV / ° F
    (zero point at 32 °F)
    10 mV /. ° C  
     
    electrical connection 3-Pin MIL-C-5015    
     
    pin assigNment (PIN A) acceleration output    
     
    Pin assigNment (PIN B) dimensions    
     
    pin assigNment (PIN C) temperature output    
     
    size - height 1.86 in 47.2 mm  
     
    mass 2.0 oz 56.7 grams  
    (EX) with ATEX approval
    approved for explosive atmosphere ren CL I, div 2, groups A, B, C, D ExnL IIC T4, AExnA IIC T4    
     
    approval for use in potentially explosive atmospheres EEx nL IIC T4,-40 ° C≤Ta≤121 ° C, II 1 G    
     
    Approval for use in potentially explosive atmospheres CL I, div I, groups A, B, C, D CL II, div I, groups E, F, G Cl III, div I    
     
    approval for explosionsgefä endangered atmospheres ExIA IIC T4, AExia IIC, T4    
     
    approval for use in potentially explosive atmospheres EEx nL IIC T4,-40 ° C≤Ta≤121 ° C, II 3 G    
    PCB-(M)603C02

    Specific References

    Download

    603C02_drawing.PDF

    Technical drawing

    Download (64.2k)

    603C02_manual.PDF

    Operating instructions

    Download (1.31M)

    603C02_specs.PDF

    Technical data sheet

    Download (526.43k)