PCB-(M)603C62
zoom_out_map

PCB-(M)603C62

  • Industrial ICP® vibration sensor,
  • Measuring range 10 g,
  • Sensitivity500 mV / g,
  • Frequency range 0.5 … 3,000 Hz,
  • One-point calibration at 100 Hz,
  • Integrated armored cable, length 3 m,
    ending on cut end
  • "
    basic data
    sensitivity (±10%) 500 mV / g 51.0 mV/(m/s²) [6]
    measuring range ± 10 g ±98 m / s²
    Frequency range (± 3 dB) 30 … 180,000 cpm 0.5 … 3,000 Hz [5]
    resonance frequency 1,500 kcpm 25,000 Hz [2]
    Wide band resolution 350 µg 3.434 µm / s ² [2]
    linearity ≤1% [3]
    Transverse acceleration sensitivity ≤ 7%
    conditions of use
    Overload limit (shock) 5,000 g pk 49,050 m/s² pk
    temperature range -65 … 250 ° F -54 … 121 ° C
    Type of protection IP68
    Technical characteristics
    settling time (on bias voltage ± 1%) ≤ 5.0 s
    discharging charging time constant ≥ 0.3 s
    Power 18 … 28 V DC
    constant power supply 2 … 20 mA
    Output impedance < 150 Ω
    Bias voltage 8 … 12 V DC
    Spectral noise (10 Hz) 8 µg / √ Hz 78.5 (µm / s ²) / √ Hz [2]
    spectral noise (100 Hz) 3 µg / √ Hz 29.4 (µm / s ²) / √ Hz [2]
    spectral noise (1,000 Hz) 3 µg / √ Hz 29.4 (µm / s ²) / √ Hz [2]
    electric Insulation (housing) ≥ 100 MΩ
    physical properties
    size - Allen 11/16 in 18 mm
    size ße - height 4.7 in 119 mm
    dimensions (without cable) 1.8 oz 51 grams
    mounting thread 1/4 "-28 threaded " [4]
    [7] details: see PCBs Declaration of conformance PS023 and PS060
    included Accessories
    081A40 mounting bolts with 1/4 "-28 thread -1
    ICS-2 single point calibration at 100 Hz (traceable to NIST) -1
    (M) metric mounting
    equipment
    M081A61 metric mounting bolts with M6 thread -1
    ( TO) temperature output
    temperature range 36 … 250 ° F 2 … 121 ° C
    transcription factor 5.56 mV / ° F
    (zero point at 32 °F)
    10 mV / ° C
    connections (red wire) acceleration output
    (black wire) pin assigNment mass
    Pin assigNment (white wire) temperature output
    pin assigNment (green wire) ground
    (EX) with ATEX approved
    Approved for use in potentially explosive atmospheres ExIA IIC T4, AExia IIC, T4
    approval for use in potentially explosive atmospheres ex nL IIC T4, - 40 ° C ≤ Ta ≤ 121 ° C, II 3 G
    approval for use in potentially explosive atmospheres ex ia IIC T4,-40 ° C ≤ Ta ≤ 121 ° C, II 1 G
    Approved for use in potentially explosive atmospheres CL I, div I, groups A, B, C, D CL
    II, div I, groups E, F, G Cl
    III, div I
    approval for use in potentially explosive atmospheres CL I, div 2, groups A, B, C, D
    ExnL IIC T4, AExnA IIC T4
    PCB-(M)603C62

    Specific References

    Download

    603C62_drawing.PDF

    Technical drawing

    Download (33.65k)

    603C62_specs.PDF

    Technical data sheet

    Download (33.64k)